Easy
Less than 15 minutes
This replacement table insert is specially designed for Delta scroll saws. It is a genuine part that is supplied from original equipment manufacturer. The purpose of an insert is to reduce the splintering and chips on the cuts. It also helps to prevent thin slices of wood from jamming in between the blade and the plate. This item is made out of plastic and it is sold individually. To replace this table insert no tools would be needed. Simply place it in the slot on the table/bench.
Table Insert 900200
OEM part for: Delta
Part Number: 900200
$3.99
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 13 machines
Delta
SM600 Type 1 Scroll Saw View Diagrams & Manuals
SS250 Type 1 Scroll Saw View Diagrams & Manuals
SS350LS Type 1 Bench Scroll Saw View Diagrams & Manuals
SS350 Type 1 Scroll Saw View Diagrams & Manuals
SS200 Type 1 Scroll Saw View Diagrams & Manuals
40-640 Type 2 20" Scroll Saw View Diagrams & Manuals
40-640 Type 1 20" Scroll Saw View Diagrams & Manuals
40-570 Type 1 Scroll Saw View Diagrams & Manuals
40-560 Type 2 16" Scroll Saw View Diagrams & Manuals
40-540 Type 2 Scroll Saw View Diagrams & Manuals
40-540 Type 1 Scroll Saw View Diagrams & Manuals
40-530 Type 2 Scroll Saw View Diagrams & Manuals
40-530 Type 1 Scroll Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
- Scroll Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Worked great
Fit perfectly
Guest -
June 20, 2023
Verified Purchase
Great quality, even better than I expected
Fast delivery and great quality. Will definitely order from here again in the future
Guest -
May 20, 2021
Verified Purchase
Just what I was looking for.
I could not find this part I needed anywhere but ereplacementparts had it and it works and fits my scroll saw just fine. Fast shipping and reasonably priced. Great service.
Guest -
March 15, 2021
Verified Purchase
As described. Nice
Just right
Guest -
June 12, 2020
Verified Purchase
Delta scroll saw,older model,but quality made.
Thanks so much for the parts on my Delta scroll saw. I actually found it at a restore in my area,and looked at it and thought ,yes it can be fixed. I'll do a search on my computer,to locate a source for parts,and I found you people,had access to some parts.The blade plate was missing and the switch needed to be replaced also. I sand blasted the scroll saw,and painted it also. now with the new parts on ,it looks like new,thanks to you people.I always liked Delta tools. I have a Delta contractors table saw also. I like very much. All the best to you people for the help. Thanks ! From Ken
Guest -
August 22, 2019
Verified Purchase
Exact Part
Fast shipping, exact part, scroll saw working great.
iGlobal -
March 16, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Table Insert
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Table Insert was missing
Geoff - June 21, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
The table insert for my scroll saw had been miss placed. The best part of eReplacements was the price and turn around time. I had my replacement insert within a week and was able to get back to my projects quickly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old and wore out.
Randy - November 15, 2021
Tool Type
Scroll Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed 4 cover screws and replaced worn parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost spring that holds blade tension bar
KEVIN - January 3, 2020
Tool Type
Scroll Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Removed retaining clip at back of blade tightening arm. Put in spring assembled and put clip back on. Very small space to work with but after a few tries it went back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
needed to replace the old part
Albert - November 28, 2019
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, no tools required
Parts Used
just put in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
missing blade holder
Walter - September 4, 2019
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Nutdriver
put holder in place with screw and SQ nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Center insert missing
Allen - September 14, 2018
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Placed replacement insert in table all done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing the insert
Steve - October 19, 2017
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, fingers
Parts Used
Just place the insert in the table
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Table missing the insert
Eric - August 10, 2017
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Just place the insert in proper location and it fits perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost part.
William - August 9, 2017
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Replaced the missing part. No tools needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts wore out
Dennis - February 19, 2017
Tool Type
Scroll Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replace the insert, pushed in the clip with a screwdriver.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
