Easy
Less than 15 minutes
This is a genuine manufacturer sourced replacement part. It is specially designed for Milwaukee band saws. Switch handles on/off and variable speed functions of the tool. Because switches have mechanical internal components, over time they will wear out and begin breaking down requiring replacement. Please note this plastic switch is sold separately.
Replacing a switch is a quick and easy repair. You should only need a screwdriver.
• First make sure the tool is unplugged
• Separate housing by removing screws
• Disconnect wires from the switch
• Remove old switch and secure new one
• Reconnect wires to the switch
• Reassemble and test the saw
Switch 23-66-0771
OEM part for: Milwaukee
Part Number: 23-66-0771
$26.15
In Stock
Order within the next 7 hours and your part ships today! 
Jump To:
Product Description ?
- 125 Volt TSC 125V 10A
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
Milwaukee
6230 (SER 678D) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678E) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678F) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678G) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678H) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678J) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6234 (SER 674D) Bandsaw View Diagrams & Manuals
6227 (SER 674C) Bandsaw View Diagrams & Manuals
6227 (SER 674D) Bandsaw View Diagrams & Manuals
6234 (SER 674E) Bandsaw View Diagrams & Manuals
6234 (SER 674F) Bandsaw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
This part replaces obsolete part #: 23-66-1100, 23-66-0770
Repair Videos ?
Watch the Repair Video for
Switch
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect part very first time
I always get good parts from Ereplacement parts. I have never had one problem or one bad part from this company.
Len -
June 18, 2019
Verified Purchase
Correct part
Correct part easy to find and a fair price.
Guest -
May 30, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
My switch has just a black and white wire going to the cord and to black wires beside each other and a yellow wire. How I wire my up to this new switch.
robert
for model number Millwaukee Band saw NO.6230
asked on 2023-03-03
Hi Robert,
Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the switch, https://www.youtube.com/watch?v=E-8jjNvoh50. The band saw in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps with the repair!
eReplacementParts Team March 03, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch Broken
Ken - February 24, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Torx Bits
Parts Used
Remove 4 small screws and 2 large screws on left side of handle.
Remove wires behind screws and pressure clips.
Place wires on new switch in the same locations.
Place new switch in right handle and put on left handle part.
Replace screws - tighten and test
Remove wires behind screws and pressure clips.
Place wires on new switch in the same locations.
Place new switch in right handle and put on left handle part.
Replace screws - tighten and test
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The saw would not run.
jason - January 25, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed the screws in the handle, disconnected the wires from the old switch, Then put the wires on the new switch where they were on the old one, put it back together. Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch stopped working
David - December 14, 2015
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove the left half of the handle. Disconnect the four wires and connect to new switch. Made a wiring diagram of where the wires were hooked to the switch. Installed the new switch. Replace handle half, back to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
