Easy
15-30 minutes
This switch has 5 terminals an a safety lock system that prevents accidentally turning it on. This is a genuine Makita replacement part.
Switches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:
• The tool has completely stopped functioning – it will not start.
• The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t start at all.
• The variable speed function and electric braking aren’t working properly.
Switch 651567-7
OEM part for: Makita
Part Number: 651567-7
Order within the next 8 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 5 machines
Makita
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch broke. Would not turn on or off. It was broken.
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
2. Order part after going to several online locations.
3. Replaced the part after taking pictures of the location of wires. Not really needed.
4. Tested the new switch and it worked fine. Could have completed repair quicker but had a small challenge with the device that held the switch in place.
MAKITA ,, bad switch and worn brushes
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Bottle opener
Parts Used
,, drink beer until saw ready to start,,, start saw,, stop saw,, put saw away,, and have a victory beer!!!!!
Broken switch
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Pulled out old switch
Disconnected wiring making a note of where they attach
Attached wiring and snapped switch into place
Reinstalled safety button
Done
Note: if old switch is difficult to remove it may be necessary to unscrew the switch mounting plate and switch box
Motor was burned up
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Broken start switch
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Handle on table saw and switch were broken
Tool Type
Table Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Table saw would not turn on.
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Key punch, small hammer
2. Take a close-up picture of electrical connections with cell phone, unplug old switch.
3. Connect new switch. (use picture for reference to be sure connections were correct.)
4. Replace switch cover. done.
5. Use key punch to carefully remove old broken plastic handle.
6. Install new handle, use 'small' hammer to tap in key.
7. Had to find a screw for tightener as mine was gone and was not included with new handle. done.
8. Removed old carbon brushes, they still had half of their original length, so I used an air hose to blow off any sawdust and put them back in. done. Did not install the new ones, not needed, will save for future use.
Saw works just fine now.
Start switch was not working
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Parts Used
Switch on saw broke
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Switch lever was broken.
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
