Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually.
To replace this switch you would need a Screwdriver.
• Remove screws used to hold two pieces of housing set together
• Disconnect wires from the old switch and remove it from the housing
• Place the new switch in the housing and connect wires to it
• Reassemble the housing
Switch Assembly 2610013852
OEM part for: Dremel, Bosch
Part Number: 2610013852
7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.03 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Dremel
This item works with the following types of products:
- Multi-Tool Parts
Repair Videos ?
Step-by-step instructions for removing and installing the switch assembly on your Dremel rotary tool....
September 08, 2017
|
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced variable speed switch on Dremel 3000
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, torx
Parts Used
Once removed, separate casing. Remove armature. Remove power wire from switch with paper clip unfolded. Pull switch from armature housing.
Replace switch, push power wires into slots.
Reassemble.
Device would not come on. Suspect bad switch.
Tool Type
MultiTool
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Speed control broke, only ran full speed.
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Torx bits
Parts Used
Dremel 3000. Switch and brushes melted
Tool Type
MultiTool
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx driver
Switch stop working thought it was the brushes
Tool Type
MultiTool
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
would not run
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
The switch button came out of its slot
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
The switch burned up
Tool Type
MultiTool
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, A drill press
Parts Used
Removed the switch assembly
Milled the slot out in the case so the new switch would fit. The push levers were different
Installed the new switch.
Put the multi-tool case back together
the old switch no longer closed contact
Tool Type
MultiTool
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, needle nose plier
Parts Used
Switch was burned out
Tool Type
MultiTool
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wire strippers
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.