Easy
15-30 minutes
It is an authentic part that is supplied by the original equipment manufacturer for use with Ryobi drill-drivers. The purpose of this switch is to control the on/off function of the tool, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality plastic body switch is sold individually.
Assembly Switch 270013028
OEM part for: Ryobi
Part Number: 270013028
$17.87
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 2 machines
Ryobi
P271 18V, 1/2" 2-Speed Drill-Driver View Diagrams & Manuals
P270G 1/2-In. 2-SPEED 18 Volt Drill-Driver View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Switch
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Drill was smoking from the trigger area and sparks. Was not turning as it should .
Christopher - April 13, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Soldering gun
Parts Used
Removed the battery
Took out all of the screws from the housings
Removed one housing half
Used a solder gun to removed the solder from the existing switch, then removed it
Soldered on the new switch wires
Made sure all of the wires were in the correct spot
Screwed the housings together
No more smoking or arcing
Took out all of the screws from the housings
Removed one housing half
Used a solder gun to removed the solder from the existing switch, then removed it
Soldered on the new switch wires
Made sure all of the wires were in the correct spot
Screwed the housings together
No more smoking or arcing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trigger switch failed
Joseph - March 24, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Soldering iron
Parts Used
1. Took the drill housing apart with a screwdriver.
2. Unsoldered the existing trigger switch.
3. Inserted the replacement switch and soldered it in place.
4. Reassembled the drill housing.
5. Used the drill immediately.
2. Unsoldered the existing trigger switch.
3. Inserted the replacement switch and soldered it in place.
4. Reassembled the drill housing.
5. Used the drill immediately.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
broken switch
Michael - September 21, 2022
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill, none
Parts Used
Replaced switch on my cordless drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
trigger assembly would intermitantly work
Shane - November 29, 2021
Tool Type
Cordless Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, soldering gun required!
Parts Used
removed the old assembly
UNsoldered the old connection to the trigger group
REsoldered the new one in place
UNsoldered the old connection to the trigger group
REsoldered the new one in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter trigger switch was bad.
Jimmy - April 13, 2018
Tool Type
Cordless Drill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Solidering tool
Parts Used
Trigger switch was bad had to replace it. Simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
