Grid squares measure 1x1 inch

Watch The
Repair Video

Blade Clamp Kit 14-46-1011

Part Number: 14-46-1011

37 Reviews

Order within the next 10 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 31-15-0510, 45-22-0080, 44-60-0625, 42-50-0075, 40-50-0160 and 31-15-0075.

Product Information

Description:

This is an authentic OEM sourced replacement part. It is specially made for use with Milwaukee sawzalls. This is an identical replacement for a missing or a faulty large steel quik-lok blade clamp kit that was included with a new unit. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the exact location and application of this hardware. Keep in mind this high-quality kit is sold individually.

NOTE: We do off an article and video on how to install this kit in our Repair Center:

How to Change the Milwaukee Sawzall QUIK-LOK Blade Clamp Assembly

Warning: California's Proposition 65

Frequently Purchased With

Gear Case Insu..
$8.89

Compatibility

This part is compatible with the following machines:

Milwaukee

6515-51 (SER 971B) Cordless 18 Volt Sawzall
6516-02 (SER 918C) Cordless Sawzall
6521-50 (SER 326A) Sawzall
6518 (SER 859D) Sawzall
6518 (SER 859G) Sawzall
6519-21 (SER 899A) Sawzall Plus / 50th Anniversary Sawzall Plus
6519-50 (SER 899A) Sawzall Plus / 50th Anniversary Sawzall Plus
6521-21 (SER 981A) Sawzall
6521-21 (SER 981B) Sawzall
6521-21 (SER 981C) Sawzall
6517-20 (SER 917B) Sawzall
6537-22 (SER 916F) Super Sawzall with Quik-Lok Blade Clamp
6514-20 (SER 372A) Cordless 18 Volt Hatchet Sawzall
6514-50 (SER 372A) Sawzall
6509-21 (SER 962C) Sawzall
6507-20 (SER 182A) Sawzall
6521-51 (SER 981B) Sawzall
0719-20 (SER A56B) Sawzall
6518-75 (SER 985A) Sawzall
6537-22 (SER 916D) Sawzall
6517-20 (SER 917A) Sawzall
6509-21 (SER 962E) Sawzall
6518-55 (SER 859B) Sawzall
6527-21 (SER 963A) Sawzall
6509-20 (SER A17A) Sawzall
6509-20 (SER A17B) Sawzall
6509-20 (SER A17C) Sawzall
6509-20 (SER A17D) Sawzall
6509-20 (SER A17E) Sawzall
6509-22 (SER A17A) Sawzall
6509-22 (SER A17B) Sawzall
6509-22 (SER A17C) Sawzall
6509-22 (SER A17D) Sawzall
6509-22 (SER A17E) Sawzall
6519-22 (SER A18A) Sawzall
6519-22 (SER A18B) Sawzall
6519-22 (SER A18C) Sawzall
6519-22 (SER A18D) Sawzall
6524-21 (SER A44A) Corded Hatchet Sawzall
0719-20 (SER A56A) V28 Sawzall Reciprocating Saw
6515-20 (SER 971A) 18 Volt Sawzall Recip Saw

Expand the 81 compatible machines

Products Compatibility

This item works with the following types of products:

• Saw

Repair Guides

Watch the Repair Video for Blade Clamp Kit

Questions & Answers for Blade Clamp Kit

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

10 of 13 people found this instruction helpful

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

, Awl

Coller that retains blade breaks over a lot of use, not a defect, just normal wear.

Remove the retaining ring and the first cam ring. Remove the lock pin and then the rest of the chuck will come off. Put the new spring cover on and the spring. Slide the sleeve onto the shaft and line up the holes. Put the rear cam on and hook it to the spring. Rotate the cam until there is enough room to put the lock pin in. Put the front cam on and make sure it lines up with the rear cam. Put the retaining ring on.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 5 people found this instruction helpful

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set

Blade clamp broke

The new assembly includes installation instructions that are very easy to follow. Had my saw saw up and running in no time. Thank you.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 4 people found this instruction helpful

Tool Type:

Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, knife

Blade lock not working

After watching your you tube video on how to install this kit. I had it done in about 15 minutes. Thank you.
https://www.youtube.com/watch?v=4pCN-BDBG6I

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Broken blade lock spring

Instructions included with parts were clear with perfect diagrams. Looked exactly like my saw and parts. Made it a very easy repair.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Rotary Hammer

Parts Used:

Ball Bearing - 02-04-1510

Blade Clamp Kit - 14-46-1011

Primary Wobble Plate Assy - 14-67-0135

Spacer - 45-36-1440

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Torx driver, press, snap ring pliers

Wobble plate bearings went bad.

1. Disassemble the gear box and clean.
2. Replace the wobble plate and the bearings.
3. Replace grease and reinstall the gear box.
4. Install the new blade clamp.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Milwaukee saw blade release.

Replaced release followed included instructions worked great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Sawzall blade quick connect broke

Removed old clamp following simple instructions supplied then installed new parts in reverse order as instructed. just have to pay close attention to position and orientation of new parts.suggest laying out old parts in order of removal for reference.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

, Small hook to remove old retaining spring

Broken blade holder

Removed the old part and installed the new part. Working again, so all is good!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

The Quick-Lok was work out and the plastic parts failed

Bought these parts... Threw them into my suitcase and flew to Guatemala. Took fifteen minutes to finish up with the instructions Milwaukee included with the parts. Could not have worked out better. You get down here were mail is undependable and ocean freight takes six weeks you don't want to find out you have the wrong parts. Everything was as promised and Ereplacement was able to fulfill my last minute order and get the parts to me before I flew out. I definitely will being doing business with them for my future repair needs.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Reciprocating Saw

Parts Used:

Blade Clamp Kit - 14-46-1011

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Awl

Blade would not hold in clamp

Happily this kit includes some great installation instructions. I had my sawzall working again in under ten minutes.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

37 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Perfect parts

It’s such a waste to throw things away when all they need is minor repairs. Thank you for providing parts to make the repairs.

Guest - September 6, 2023 Verified Purchase

Parts look good.

Haven’t actually installed yet. Will follow up.

Anthony - September 4, 2023 Verified Purchase

ereplacementparts you are the best!!

Excellent quality and service, would recommend to anybody for parts. Fast service with quality original parts. couldn’t be more satisfied!

Guest - May 12, 2023 Verified Purchase

Wasn't sure I had the right part, but worked perfectly!

I initially had some concerns, as the mechanism for the kit I received was slightly different than what was on my sawzall, but it ended up working perfectly and is as good as new! The replacement video on your website was a huge help.

Guest - April 1, 2023 Verified Purchase

Worked perfect

The hard part was removing the old/original part.

Guest - March 21, 2023 Verified Purchase

Perfect replacement

Part fit great and the saw works like new.

Guest - March 8, 2023 Verified Purchase

Simple and quick fix

Prompt delivery, fair price and was exactly the parts I needed. I will definitely be back when the need arises.

Guest - February 15, 2023 Verified Purchase

Easy fix, parts all worked.

Got it when promised and installed fine. Directions could have been a bit better, but all in all. Great.

Guest - October 12, 2022 Verified Purchase

Good part

Well made part's

Guest - October 11, 2022 Verified Purchase

Blade clamp kit for Milwaukee Sawzall

Correct size part, install was easy.

Gary - September 12, 2022 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Watch the Repair Video for Blade Clamp Kit