Starter Pulley 98770A

Description:

This starter pulley is an OEM part direct from Ryobi. This part is compatible with a variety of lawn and garden devices. The pulley is most often fitted between the air baffle and the container w/spring within the starter assembly. Please consult specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver and a hex key are usually needed in making the replacement.

Frequently Purchased With

Spring And Con..
$4.99

Starter Rope
$4.99

Compatibility

This part is compatible with the following machines:

Ryobi

RY70101 Curved Shaft Trimmer
RY70101A Curved Shaft Trimmer
RY70103 Curved Shaft Trimmer
RY70103A Curved Shaft Trimmer
RY70105 Straight Shaft Trimmer

RY70105A Straight Shaft Trimmer
RY70107 Straight Shaft Trimmer
RY70107A Straight Shaft Trimmer
RY70111 Curved Shaft Trimmer
RY70113 Curved Split Shaft Trimmer

Homelite

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Trimmer
• Vacuum

Repair Instructions: Submitted by Customers Like You

3 of 3 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spring And Container - 638033001

Starter Pulley - 98770A

Starter Rope - 900849002

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Gear on starter pulley was bad and also cord broke

Removed engine and replaced parts. Reinstalled engine and now all is good. One bolt hard to get at, otherwise went pretty smooth.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Spring And Container - 638033001

Starter Pulley - 98770A

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Power Drill, Socket set

Blower starter chord broke and spring was sprung.

Not hard to do but time consuming. Had to take blower/vacuum housing off, separate both halves of plastic shroud, remove motor, take off fan, replace spring and starter pulley then reassemble. I think the only tools required was a phillips screwdriver and one socket. Replacing the starter cord and spring cannot be done without disassembling the blower. I replaced the starter pulley and spring while I had it apart. Could have used the old spring by bending it but didn't want to have to go through the disassembly/reassembly again in a few months. Now my $100.00 blower from 16 years ago should be ready for a few more years.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Spring And Container - 638033001

Starter Pulley - 98770A

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Nutdriver, Torx bits/drivers

Leaf blower rope broke / breaking recoil spring!

Replaced recoil spring/container, replaced rope on NEW spool due to unusual wear where spring catches spool, rewound spring tension additional 2 turns clockwise and secured spool . Replaced covers and everything works great! Jim G.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spring And Container - 638033001

Starter Pulley - 98770A

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Weed trimmer recoil spring came out of it's holder when I took it apart. The rope wasn't retracting right was the reason I took it apart in the first place.

I tried to put the rope recoil spring back into it's holder and found out it's almost impossible. The cost for a new one was cheep and while I had it apart, I replaced the rope and the rope holder as they were cheep. Good to go now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

2 Reviews

Click to filter by ratings:

5 stars

2

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Very good im HAPPY!

I'm very thankful for my item it works great.

Lora - July 28, 2022 Verified Purchase

Good price and fit

Exactly what I needed,good fit and great price

Guest - September 3, 2021 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Starter Pulley