This authentic manufacturer sourced replacement starter motor which is specially produced for use with Delta table saws. The starter motor provides an initial motion to engage the flywheel to start the engine. Please note this high-quality item is sold individually.
Troubleshooting
This part works with the following brands:
Delta
This part works with the following products:
Table Saw
Shaper
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(6 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Original switch on Delta table saw kept sticking and coming on by itself or not shutting off.
Turned off the power.
Removed the plug from the outlet.
Removed the cover from the old switch.
Removed the color coded power lines from the old switch.
Install the power lines on the new switch.
Bolt the new switch to the bracket.
Install the cover plate to the new switch.
Plug in the unit and tu
... Read morern on the power.
Start cutting wood !!
Removed starter switch, just 2 cover screws and 2 mounting screws
Rewired starter - 240V. Just need to make sure you rewire it the same way, I always take pictures before disassembling.
Re-assembled - pretty straightforward.
Works as expected
Did you find this story helpful?
Thank you for voting!
Table saw starter would get hot and shut the saw down
Took off old starter and unwired it. Took off plug end of old one and replaced the plug end of the new one. Electricity that it had to hook up to was not the same end on the new part. Unhooked supply to the saw and hooked it to the new starter. Mounted the starter back on the saw. This was very easy, if you know something about wirin
... Read moreg.
Remove the switch from the switch bracket
Remove the back cover of the switch
Make a wiring diagram
Disconnect the wires from the old switch and removed them
Connected the new wires to the switch
Replaced the back cover
Attached then new switch to the bracket
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10330827
Manufacturer Part Number: A26375
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
