Starter Spring 545008014
Part Number: 545008014
Order within the next 6 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 545054901.
Product Information
Description:
This is a genuine OEM approved replacement starter spring is specially designed for use with gandheld gas powered blowers and trimmers. The purpose of this spring is to retract the starter assembly on the engine, so it engages the drive cup on the flywheel to start the engine when pulled. This spring is made out of metal and it is sold individually. |
Frequently Purchased With
Compatibility
the 150+ compatible machines
This part is compatible with the following machines:
Poulan
PP025 Gas Trimmer
PP125 Gas Trimmer
PP136E Type 1 Gas Trimmer
PP136E Type 2 Gas Trimmer
PP325 Gas Trimmer
PPB100E Type 1 Gas Trimmer
PPB100E Type 2 Gas Trimmer
PPB150E Type 1 Gas Trimmer
PPB150E Type 2 Gas Trimmer
PPB200E Type 1 Gas Trimmer
PPB200E Type 2 Gas Trimmer
PPB250E Type 1 Gas Trimmer
PPB250E Type 2 Gas Trimmer
PPB300E Type 1 Gas Trimmer
PPB300E Type 2 Gas Trimmer
PPB32SST Type 1 Gas Trimmer
PPB32SST Type 2 Gas Trimmer
PP258TP (Type 1) Pole Pruner
PP258TP (Type 2) Pole Pruner
BVM210VS (Type1) Pro Gas Blower
BVM210VS (Type2) Pro Gas Blower
SM210VS (Type1) Pro Leaf Blower
PP125 Gas Trimmer
PP136E Type 1 Gas Trimmer
PP136E Type 2 Gas Trimmer
PP325 Gas Trimmer
PPB100E Type 1 Gas Trimmer
PPB100E Type 2 Gas Trimmer
PPB150E Type 1 Gas Trimmer
PPB150E Type 2 Gas Trimmer
PPB200E Type 1 Gas Trimmer
PPB200E Type 2 Gas Trimmer
PPB250E Type 1 Gas Trimmer
PPB250E Type 2 Gas Trimmer
PPB300E Type 1 Gas Trimmer
PPB300E Type 2 Gas Trimmer
PPB32SST Type 1 Gas Trimmer
PPB32SST Type 2 Gas Trimmer
PP258TP (Type 1) Pole Pruner
PP258TP (Type 2) Pole Pruner
BVM210VS (Type1) Pro Gas Blower
BVM210VS (Type2) Pro Gas Blower
SM210VS (Type1) Pro Leaf Blower
SM210VS (Type2) Pro Leaf Blower
PP446ET (Type 1) Pruner
PP446ET (Type 2) Pruner
PP446ET (Type 3) Pruner
PP446ET Pruner
PP446E (1) Pruner
PP446E (2) Pruner
PP428S (2012-12) Trimmer
SM446E Pole Pruner
PP46ET Trimmer
SM705 (Type 1) Gas Trimmer
SM705 (Type 2) Gas Trimmer
P200C Gas Powered Blower
PP25E Gas Trimmer
PP125E (967112801) Trimmer
PP26E Gas Trimmer
PPB250E (Type 3) Gas Trimmer
SM706 (Type 1) Gas Trimmer
SM706 (Type 2) Gas Trimmer
W25CBK (967184001)(2012-11) Trimmers And Edgers
W25CF (967184201)(2012-11) Trimmers And Edgers
W25SFK (967184501)(2012-11) Trimmers And Edgers
PP446ET (Type 1) Pruner
PP446ET (Type 2) Pruner
PP446ET (Type 3) Pruner
PP446ET Pruner
PP446E (1) Pruner
PP446E (2) Pruner
PP428S (2012-12) Trimmer
SM446E Pole Pruner
PP46ET Trimmer
SM705 (Type 1) Gas Trimmer
SM705 (Type 2) Gas Trimmer
P200C Gas Powered Blower
PP25E Gas Trimmer
PP125E (967112801) Trimmer
PP26E Gas Trimmer
PPB250E (Type 3) Gas Trimmer
SM706 (Type 1) Gas Trimmer
SM706 (Type 2) Gas Trimmer
W25CBK (967184001)(2012-11) Trimmers And Edgers
W25CF (967184201)(2012-11) Trimmers And Edgers
W25SFK (967184501)(2012-11) Trimmers And Edgers
Weed Eater
W25SB Trimmer Edger
PP428C (2012-02) 4-Cycle Curved Shaft Trimmer
PP258TPC (579218001)(2011-10) Pole Saw
PP428C (2012-02) 4-Cycle Curved Shaft Trimmer
PP258TPC (579218001)(2011-10) Pole Saw
Craftsman
358794770 Gas Blower
358794650 25Cc 210Mph / 450 Cfm Gas Blower
358794600 25Cc 200 Mph / 430 Cfm Gas Blower
358794780 Blower
358794765 Blower
358794774 Blower
358794741 Blower
358791070 Trimmer
358794773 Blower
358791030 Trimmer
358791031 Trimmer
358791032 Trimmer
358791040 Trimmer
358791041 Trimmer
358791042 Trimmer
358791050 Trimmer
358791051 Trimmer
358791060 Trimmer
358791061 Trimmer
358791071 Trimmer
358791072 Trimmer
358791800 Trimmer
358791801 Trimmer
358791820 Trimmer
358795810 Trimmer
358795811 Trimmer
358795820 Trimmer
358795821 Trimmer
358795822 Trimmer
944516560 Trimmer
944516561 Trimmer
944516570 Trimmer
358794650 25Cc 210Mph / 450 Cfm Gas Blower
358794600 25Cc 200 Mph / 430 Cfm Gas Blower
358794780 Blower
358794765 Blower
358794774 Blower
358794741 Blower
358791070 Trimmer
358794773 Blower
358791030 Trimmer
358791031 Trimmer
358791032 Trimmer
358791040 Trimmer
358791041 Trimmer
358791042 Trimmer
358791050 Trimmer
358791051 Trimmer
358791060 Trimmer
358791061 Trimmer
358791071 Trimmer
358791072 Trimmer
358791800 Trimmer
358791801 Trimmer
358791820 Trimmer
358795810 Trimmer
358795811 Trimmer
358795820 Trimmer
358795821 Trimmer
358795822 Trimmer
944516560 Trimmer
944516561 Trimmer
944516570 Trimmer
944516571 Trimmer
944516660 Trimmer
944516661 Trimmer
944516662 Trimmer
944518250 Blower
944518252 Blower
358794700 Blower
358794701 Blower
358794702 Blower
358794703 Blower
358794704 Blower
358794730 Blower
358794731 Blower
358794732 Blower
358794733 Blower
358794740 Blower
358794742 Blower
358794743 Blower
358794744 Blower
358794750 Blower
358794751 Blower
358794760 Blower
358794761 Blower
358794762 Blower
358794763 Blower
358794764 Blower
358794771 Blower
358794772 Blower
358794775 Blower
358794776 Blower
358794781 Blower
358.791032 2-Cycle Gasoline Weedwacker
944516660 Trimmer
944516661 Trimmer
944516662 Trimmer
944518250 Blower
944518252 Blower
358794700 Blower
358794701 Blower
358794702 Blower
358794703 Blower
358794704 Blower
358794730 Blower
358794731 Blower
358794732 Blower
358794733 Blower
358794740 Blower
358794742 Blower
358794743 Blower
358794744 Blower
358794750 Blower
358794751 Blower
358794760 Blower
358794761 Blower
358794762 Blower
358794763 Blower
358794764 Blower
358794771 Blower
358794772 Blower
358794775 Blower
358794776 Blower
358794781 Blower
358.791032 2-Cycle Gasoline Weedwacker
Husqvarna
BVM210VS (2009-03) Blower
GBV345 (2010-05) Blower
SM210VS (2009-03) Blower
FB25 (952711937) (2009-04) Handheld Trimmer
PP025 (Type 1) (2008-12) Handheld Trimmer
PP025 (Type 2) (2008-12) Handheld Trimmer
PP125 (Type 1) (2009-03) Handheld Trimmer
PP125 (Type 2) (2009-03) Handheld Trimmer
PP25E (2009-01) Handheld Trimmer
PP325 (Type 1) (2008-12) Handheld Trimmer
PP325 (Type 2) (2008-12) Handheld Trimmer
PPB100E (Type 1) (2007-09) Handheld Trimmer
PPB100E (Type 2) (2007-09) Handheld Trimmer
PPB150E (Type 1) (2009-03) Handheld Trimmer
PPB150E (Type 2) (2009-03) Handheld Trimmer
PPB150E (Type 3) (2009-03) Handheld Trimmer
PPB200E (Type 1) (2009-02) Handheld Trimmer
PPB200E (Type 2) (2009-02) Handheld Trimmer
GBV345 (2010-05) Blower
SM210VS (2009-03) Blower
FB25 (952711937) (2009-04) Handheld Trimmer
PP025 (Type 1) (2008-12) Handheld Trimmer
PP025 (Type 2) (2008-12) Handheld Trimmer
PP125 (Type 1) (2009-03) Handheld Trimmer
PP125 (Type 2) (2009-03) Handheld Trimmer
PP25E (2009-01) Handheld Trimmer
PP325 (Type 1) (2008-12) Handheld Trimmer
PP325 (Type 2) (2008-12) Handheld Trimmer
PPB100E (Type 1) (2007-09) Handheld Trimmer
PPB100E (Type 2) (2007-09) Handheld Trimmer
PPB150E (Type 1) (2009-03) Handheld Trimmer
PPB150E (Type 2) (2009-03) Handheld Trimmer
PPB150E (Type 3) (2009-03) Handheld Trimmer
PPB200E (Type 1) (2009-02) Handheld Trimmer
PPB200E (Type 2) (2009-02) Handheld Trimmer
PPB250E (Type 1) (2009-01) Handheld Trimmer
PPB250E (Type 2) (2009-01) Handheld Trimmer
PPB250E (Type 3) (2009-01) Handheld Trimmer
PPB300E (Type 1) (2009-02) Handheld Trimmer
PPB300E (Type 2) (2009-02) Handheld Trimmer
PPB32SST (Type 1) (2009-05) Handheld Trimmer
PPB32SST (Type 2) (2009-05) Handheld Trimmer
SM706 (Type 1) (2008-12) Handheld Trimmer
SM706 (Type 2) (2008-12) Handheld Trimmer
PP258TP (Type 1) (2008-12) Pole Pruner
PP258TP (Type 2) (2008-12) Pole Pruner
PP446E (Type 1) (2009-01) Pole Pruner
PP446E (Type 2) (2009-01) Pole Pruner
PP446ET (Type 1) (2009-02) Pole Pruner
PP446ET (Type 2) (2009-02) Pole Pruner
PP446ET (Type 3) (2009-02) Pole Pruner
SM446E (Type 1) (2009-01) Pole Pruner
SM446E (Type 2) (2009-01) Pole Pruner
PPB250E (Type 2) (2009-01) Handheld Trimmer
PPB250E (Type 3) (2009-01) Handheld Trimmer
PPB300E (Type 1) (2009-02) Handheld Trimmer
PPB300E (Type 2) (2009-02) Handheld Trimmer
PPB32SST (Type 1) (2009-05) Handheld Trimmer
PPB32SST (Type 2) (2009-05) Handheld Trimmer
SM706 (Type 1) (2008-12) Handheld Trimmer
SM706 (Type 2) (2008-12) Handheld Trimmer
PP258TP (Type 1) (2008-12) Pole Pruner
PP258TP (Type 2) (2008-12) Pole Pruner
PP446E (Type 1) (2009-01) Pole Pruner
PP446E (Type 2) (2009-01) Pole Pruner
PP446ET (Type 1) (2009-02) Pole Pruner
PP446ET (Type 2) (2009-02) Pole Pruner
PP446ET (Type 3) (2009-02) Pole Pruner
SM446E (Type 1) (2009-01) Pole Pruner
SM446E (Type 2) (2009-01) Pole Pruner
Products Compatibility
This item works with the following types of products:
- • Blower
- • Edger
- • Pruner
- • Trimmer
Questions & Answers for Starter Spring
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 11 people found this instruction helpful
Tool Type:
Pruner
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Wrench Set
Broken starter rope return spring
Disassembled the trimmer cowling. This was the hardest part. Old spring pops out, new spring module pops in. Adjusted the pull tension of the rope by stressing the spring, blocking the pulley and restringing the rope. Reassembled the cowling. Watch out for the Kill Switch wiring, that tries to drift into the screw holes between the plastic moldings. Reassembling is the most time-consuming because of maintaining alignments of multiple parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
, 20mm and 25mm Torx drivers
Starter rope wouldn't retract
Removed housings to access starter recoil spring, undo off switch leads.
Removed two screws holding rope reel and spring housing in place.
Popped out starter spring housing, and replaced it with new starter recoil spring in housing, being careful not to let spring pop out.
Replaced the starter rope, which simply required tying two knots.
Wound rope onto reel, and reinstalled in housing.
Wind tension into starter reel.
Reinstalled two screws.
Replace housing, connecting off switch leads.
All screws are either 20mm or 25mm Torx.
Included instructions were somewhat helpful for rope wind direction, but other than that it was an relatively easy repair without them.
Removed two screws holding rope reel and spring housing in place.
Popped out starter spring housing, and replaced it with new starter recoil spring in housing, being careful not to let spring pop out.
Replaced the starter rope, which simply required tying two knots.
Wound rope onto reel, and reinstalled in housing.
Wind tension into starter reel.
Reinstalled two screws.
Replace housing, connecting off switch leads.
All screws are either 20mm or 25mm Torx.
Included instructions were somewhat helpful for rope wind direction, but other than that it was an relatively easy repair without them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver
Rope wouldn't rewind.
Opened up and removed the housing to get inside to replace the starter pulley and the spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver
spring cup had a crack
replaced spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, extended torx set
Recoil spring would not retract cord
Removed drive shafts.
Removed spark plug and inserted cording with the piston down.
Removed engine cover.
Using extended torx bit remove drive adapter
Remove clutch
Replace spring with tension
Reassemble
(Before you attempt this repair-consult the replacement video on utube
Removed spark plug and inserted cording with the piston down.
Removed engine cover.
Using extended torx bit remove drive adapter
Remove clutch
Replace spring with tension
Reassemble
(Before you attempt this repair-consult the replacement video on utube
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Nutdriver
rope broke and starter pulley was replaced
took out old rope and pulley
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver, misc tools
spring broke decided to go thru entire engine and rework runs great
went thru whole engine cleaned and replaced used common sense and know how runs great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver, torque driver
spring sipped out of baffle plate
rewound starter rope ,replaced spring and secured it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill
The starter spring became weak and the starer pulley did not hold spring in place.
1. Removed all screws to outer casing.
2. Put in new starter spring and pulley.
3. Wound new rope and left excess.
4. Reinstalled all components.
5. Tested and then cut excess rope off to appropriate length.
6. Made a video of me clowning around with blower running since nephew worked on it for some time and never got it running!!! lol
2. Put in new starter spring and pulley.
3. Wound new rope and left excess.
4. Reinstalled all components.
5. Tested and then cut excess rope off to appropriate length.
6. Made a video of me clowning around with blower running since nephew worked on it for some time and never got it running!!! lol
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
, Torx bits
Starter rope would not fully retract.
1. Separated throttle/switch assembly from trimmer shaft.
2. Removed string trimmer shaft. After removing one screw and loosening the clamp, the shaft simply pulls out of clutch/motor assembly
3. Removed plastic engine covers and clutch assembly. Clutch assembly must be removed in order to remove starter housing. Make note of where the screws go. Different lengths, some are machine screws.
4. Removed baffle that captures the starter assembly. WEAR EYE PROTECTION is case the spring is broken and has become dislodged.
5. Replaced parts along with a new rope (original rope was frayed causing binding).
The starter spring is pre-wound inside of a metal shroud. It simply drops into place without any hassle. No tension adjustment required.
Make sure that the starter assembly works freely before reassembling the entire string trimmer !
Fortunately, I found a YouTube video that was very similar to my application.
2. Removed string trimmer shaft. After removing one screw and loosening the clamp, the shaft simply pulls out of clutch/motor assembly
3. Removed plastic engine covers and clutch assembly. Clutch assembly must be removed in order to remove starter housing. Make note of where the screws go. Different lengths, some are machine screws.
4. Removed baffle that captures the starter assembly. WEAR EYE PROTECTION is case the spring is broken and has become dislodged.
5. Replaced parts along with a new rope (original rope was frayed causing binding).
The starter spring is pre-wound inside of a metal shroud. It simply drops into place without any hassle. No tension adjustment required.
Make sure that the starter assembly works freely before reassembling the entire string trimmer !
Fortunately, I found a YouTube video that was very similar to my application.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
8 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Priced right
Worked great, it did take some time to get but the wait was worth it due to the fact I needed it because they do not make this gas powered leaf blower anymore and I did not want to let it die, it still did have a lot of life left in it.
Steven -
June 22, 2023
Verified Purchase
Blower spring
The starter spring fit perfectly and the rope totally retracts. I was out using it after I put it together. Thanks
Guest -
July 22, 2021
Verified Purchase
eReplacement Parts, my "go to" parts supplier.
Saved buying a new blower ($150+) thanks to $10.00 worth of parts part from eReplacement Parts,. And shipping to Hawaii was a mere $5.50
Perfect fit
william -
November 8, 2019
Verified Purchase
Great replacement part
Arrived quickly. Weed eater running like a champ.
Guest -
November 5, 2019
Verified Purchase
I fixed by myself. The equipment I working perfectly
The parts came on time . The installation was very easy. I will continue shopping from you because you service is it wonderful. Thanks.
Guest -
September 4, 2019
Verified Purchase
Work fine
Will order from this company again
Guest -
August 13, 2019
Verified Purchase
Easy to replace
All the parts I received were great, easy to install and work great. My power pruner is like new again, starts and runs like new.
Guest -
April 20, 2019
Verified Purchase
Good part
Great part, slow delivery,
KEN -
September 13, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information