Medium
1-2 hours
This is an eight (8) pin sprocket compatible with some Ryobi planers. It is a genuine part produced by original manufacturer. Sprockets engage and drive chains or gears. They are designed for high wear and need replacement regularly. Sold individually.
Sprocket Ap12 1860010
OEM part for: Ryobi
Part Number: 1860010
$5.19
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Planer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Sprocket Ap12
What is the dimensions of the sprocket or at least the size of the shaft? I need it for my ap10 planer the sprocket is 1 1/2" and the shaft size 19/32
Jose
for model number AP10
asked on 2022-12-28
Hello Jose, Thank you for the question. This Sprocket is approximately 1.5" with a 1/2" Bore. We have researched the model you have provided and have found the part you are looking for is Part Number: 6860086. We are sorry, we looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
eReplacementParts Team December 28, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chains had frozen and one gear broke.
john - August 31, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Planer
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set
1.Dismantled the top and side to see inside.
2.Removed drive belt and chains and broken gears.
3.Cleaned chains to unfreeze them and found the chassis had cracked and broken in half.
4.Stared the reassemble with the gears and drive belt. the latter was just a exercise of muscles to get it on.
5. The chassis I used the J.B.Weld epoxy which is very strong and have used it many times before.
6.Completed the assembly and ran the unit and tested it out with no problems.
2.Removed drive belt and chains and broken gears.
3.Cleaned chains to unfreeze them and found the chassis had cracked and broken in half.
4.Stared the reassemble with the gears and drive belt. the latter was just a exercise of muscles to get it on.
5. The chassis I used the J.B.Weld epoxy which is very strong and have used it many times before.
6.Completed the assembly and ran the unit and tested it out with no problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sprocket broke
adrian - February 8, 2018
Tool Type
Planer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
1. Removed all framing to expose sprocket (top and side frame)
2. Replace sprocket
3. Reassemble
2. Replace sprocket
3. Reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gear box and sprocket broke when bearing failed
john - December 20, 2017
Tool Type
Planer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Allen wrenches and bearing puller
Parts Used
Pulled bearing off shaft and reinstalled shaft in gear case. Installed bearing and clip,put drive chain back on sprocket and reassembled case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
