SprayTECH Airless Sprayer Replacement Parts For Model 1620
We Sell Only Genuine SprayTECH Parts
Find SprayTECH 1620 Parts By Symptom
Choose a symptom to view parts that fix it.
Won't pump paint from can / bucket |
Paint leaks from gun |
Too little paint from gun |
Motor turns on but no paint is sprayed |
Popular Parts for SprayTECH 1620
0516198
0501011A
154675
43590
0501413
278357
1
Plastic Gun Assembly Obsolete - Not Available
$2.99
Part Number:0512120
Discontinued
Discontinued
$2.99
Discontinued
1
Metal Gun Assembly Obsolete - Not Available
$2.99
Part Number:0512121
Discontinued
Discontinued
$2.99
Discontinued
FILTER, FINE,PKGD, 16354
$23.51
Part Number:154675
Usually ships in 7 - 12 business days
Usually ships in 7 - 12 business days
$23.51
Usually ships in 7 - 12 business days
$23.51
Suction Tube Assembly-straight
$75.85
Part Number:0516198
Usually ships in 7 - 12 business days
Usually ships in 7 - 12 business days
$75.85
Usually ships in 7 - 12 business days
$75.85
Repair Guides for SprayTECH Airless Sprayer 1620
Questions & Answers for SprayTECH 1620
It will prime and hold prime with water but won't hold prime with paint
Timothy
for model number 1620
asked on 2023-02-18
Hi Timothy,
Thank you for your question. If the sprayer does not draw in paint when the PRIME/SPRAY knob is set to PRIME, there are a few reasons why this may be happening. According to your owner's manual, 1. The paint bucket is empty or the suction tube is not totally immersed in the paint. If the bucket is empty, refill the bucket or immerse the suction tube in paint. 2. The suction set is clogged. If it is, clean the suction set. 3. The suction tube is loose at the inlet valve. If it is, clean the tube connection and tighten it securely. 4. The inlet valve is stuck. If it is, clean the inlet valve. The inlet may be stuck from old paint. Depress the pusher stem to release. 5. The outlet valve is stuck. If it is, the outlet may be stuck from old paint. Remove the inlet valve. Insert a pen or pencil in the housing to release. 6. The inlet valve is worn or damaged. If it is, replace the inlet valve. 7. The PRIME/SPRAY valve is plugged. If it is, take it to an authorized service center. If you have any questions, please let us know. We look forward to hearing from you!
eReplacementParts Team February 18, 2023