eReplacementParts.com
877-346-4815
Pro Temp Parts
Repair Parts Home  HVAC Parts  Pro Temp Parts  70-052-0200 Spark Plug Kit

Spark Plug Kit 70-052-0200

OEM part for: Pro Temp, Heat Stream, Heat Hog, Master

Part Number: 70-052-0200


Install
Videos!
Spark Plug Kit - 70-052-0200:Pro Temp 360 View
Spark Plug Kit - 70-052-0200:Pro TempSpark Plug Kit - 70-052-0200:Pro TempSpark Plug Kit - 70-052-0200:Pro TempSpark Plug Kit - 70-052-0200:Pro Temp 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Medium 30-60 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
Pro TempHeat StreamHeat HogMaster
Does this d-block d-md-none fit my product?

Product Description ?

This genuine OEM spark plug kit is a replacement kit for use in outdoor power equipment. It consists of the spark plug, mounting bolt, washer, and gasket. Over time, spark plugs can become fouled with carbon deposits, leading to misfires, reduced fuel efficiency, and poor engine performance. This all-in-one kit allows you to replace the old, worn-out spark plug with a new one, ensuring the engine continues to run smoothly and efficiently. If you are experiencing difficulties starting the equipment, and running it consistently, this is a sign that the spark plug should be tested and replaced. To replace the faulty spark plug, ensure the equipment is switched off/disconnected from power. Remove the mounting bolt and detach the spark plug. Clean the mounting surface and align the new spark plug with the mounting hole. Insert the new bolt and tighten it until the spark plug is stable and secure.

  • Classification: Part
  • Weight: 0.15 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 12 machines

Pro Temp

PT-125T-KFA Kerosene Forced Air Heater View Diagrams & Manuals
PT-175T-KFA Kerosene Forced Air Heater View Diagrams & Manuals
PT-215T-KFA Kerosene Forced Air Heater View Diagrams & Manuals

Heat Stream

HS-215T-KFA Kerosene Heater View Diagrams & Manuals
HS-175T-KFA Kerosene Heater View Diagrams & Manuals
HS-125T-KFA Kerosene Heater View Diagrams & Manuals

Heat Hog

HH-125T-KFA Kerosene Forced Air Heater View Diagrams & Manuals
HH-175T-KFA Kerosene Forced Air Heater View Diagrams & Manuals
HH-215T-KFA Kerosene Forced Air Heater View Diagrams & Manuals

Master

MH190TKFA Kerosene/Diesel Forced Air Heater View Diagrams & Manuals
MH215TKFA Kerosene/Diesel Forced Air Heater View Diagrams & Manuals
MH135TKFA Kerosene/Diesel View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Heater Parts

This part replaces obsolete part #: 70-052-0205

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • all good
    still working on it but part and service was good.
    Guest - March 10, 2021 Verified Purchase
    Very satisfied.
    Spark plug for space heater. Exact match.
    Guest - January 27, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Spark Plug Kit


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (5 rated repairs)?

    bad Spark plug and Igniter

    Roy - October 30, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Heater

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Nutdriver

    First I unplugged the wires from the Spark plug and then used a screw driver to take out the bolt. Then I replaced the spark plug, and screwed the bolt back in.
    To get to the Igniter I had to take out 6 screws from the Heater Housing and lift up to slide out the Igniter and unplug it. I then replaced it with the new one and put everything back together. And now it works just Like a new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Heater would not lite

    ROSS - December 23, 2023
    Tool Type

    Heater

    Difficulty

    Hard

    Time

    1-2 hours

    Tools Used

    Screwdriver, Socket set, Nutdriver, None

    Checked the voltage on main board found it to be bad replaced but still no spark then changed igniter and it works great

    I would recommend replacement parts the people where very helpful and nice
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Heater

    Richard - March 28, 2019
    Tool Type

    Heater

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Nutdriver

    This was not a snow blower. It was a fuel oil heater that needed filters and a new air pump. Work great now, thanks for the quick service on the parts. Richard
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Torpedo Hester bad nozzle

    Stephen - March 13, 2019
    Tool Type

    Heater

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Socket set, Hammer

    Replace nozzle. Also replaced photocell and spark plug as unit sees much use
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would not ignite.

    RUSSELL - November 29, 2017
    👍 1 of 2 people found this instruction helpful
    Tool Type

    Heater

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Socket set

    Replaced the ignitor and the spark plug. Works good now!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal