Snap Ring 34-60-1400

Blade Pulley - 28-95-0120

Bumper - 42-38-0040

Gear Case - 28-14-2110

Pan Head Screw - 06-82-8864

Taptite Torx Screw - 06-82-5330

Bandsaw Blade - 48-39-0510

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Impact drill with torx screwdriver bits

Broken case and handle

Followed the very good instructions on the video......step by step, easy........I did have to jump to a different video to figure out the "bushing" replacement in the new case (that should have been mentioned in the case replacement video to make it easier) but it was also easy once I figured it out

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Sleeve Bearing - 42-40-0580

Chain Sprocket Kit - 14-46-1175

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

, Snap ring pliers,allen wrench

Bandsaw chain and sprocket worn out, bad sleeve bearing and missing snap ring

Removed the blade pulley cover
Removed the blade pulley and sleeve bearings
Installed the new chain and sprocket assembly
Installed the new bushings, the blade pulley, washer and the new snap ring
Installed the blade pulley cover

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Chain Sprocket Kit - 14-46-1175

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Snap ring pliers, Torx socket

Drive chain broke.

1. Disassembled drive wheel assembly.
2. Cleaned parts from grease and metal.
3. Lubricated the new sprocket and chain.
4. Positioned chain sprocket and chain on to driveshaft, installed new washer and snap ring.
5. Secured the drive wheel, and cap, and torqued screws, installed saw blade and tested.
6. Great OEM parts, bandsaw is back in service.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Roller Chain - 42-60-0100

Sprocket - 31-88-0010

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Snap ring pliers

Stripped sprocket inside drive side of Milwaukee Bandsaw

Removed blade
Removed 3 torx screws for wheel cover
Removed snap ring and wheel comes off and sprocket and drive chain are exposed.
Remove the sprocket and chain
Put new parts in and put back together.
Easy

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Sleeve Bearing - 42-40-0580

Blade Guard - 43-54-0245

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Hammer

Bearings worn out

Knock out old bearings and replaced with new ones. Replaced the guard, snap ring and washers, with new pulley tire and put back together. Like new

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Pan Head Screw - 06-82-8864

Bumper - 42-38-0042

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Snap ring pliers

Missing parts

I removed the blade pulley cover, then installed the hub washer and the snap ring. Then screwed the cover back on. I then simply stretched the new tire around the blade pulley. Then used the screws to mount the bumper to the saw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used: