eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home  Power Tool Parts  Milwaukee Parts  31-52-0090 Shoe Release Lever

Shoe Release Lever 31-52-0090

OEM part for: Milwaukee

Part Number: 31-52-0090


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 27 minutes and your part ships today!
Easy Less than 15 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Milwaukee replacement part, this item is sold individually.
The shoe can be adjusted forward or backward to take advantage of the unused portion of the blade or for special jobs requiring low blade clearance.
To adjust the shoe, pull out the shoe release lever 1/4 turn.
Slide the shoe forward or backward to the desired position.
After adjusting the shoe, slowly pull the trigger to be sure the blade always extends beyond the shoe and your work throughout the stroke.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 24 machines

Milwaukee

0719-20 (SER A56B) Sawzall View Diagrams & Manuals
6538-21 (SER B36A) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6519-22 (SER A18A) Sawzall View Diagrams & Manuals
6519-22 (SER A18B) Sawzall View Diagrams & Manuals
6519-22 (SER A18C) Sawzall View Diagrams & Manuals
6519-22 (SER A18D) Sawzall View Diagrams & Manuals
6520-21 (SER B02A) 1-1/8" Stroke Sawzall View Diagrams & Manuals
6520-21 (SER B02B) 1-1/8" Stroke Sawzall View Diagrams & Manuals
6523-21 (SER A65A) Sawzall View Diagrams & Manuals
6523-21 (SER A65B) Sawzall View Diagrams & Manuals
6523-21 (SER A65C) Sawzall View Diagrams & Manuals
6523-21 (SER A65D) Sawzall View Diagrams & Manuals
6536-21 (SER A66A) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66B) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66C) 1-1/4" Stroke Sawzall View Diagrams & Manuals
6536-21 (SER A66D) 1-1/4" Stroke Sawzall View Diagrams & Manuals
0719-20 (SER A56A) V28 Sawzall Reciprocating Saw View Diagrams & Manuals
6515-20 (SER 971D) 18 Volt Sawzall Recip Saw View Diagrams & Manuals
6520-21 (SER B02C) 12 Amp Orbital Sawzall Recip Saw View Diagrams & Manuals
0819-50 (SER B09A) Cordless Sawzall View Diagrams & Manuals
6515-50 (SER 971D) Cordless Sawzall View Diagrams & Manuals
0719-22 (SER A56B) Cordless Sawzall View Diagrams & Manuals
6536-21 (A66E) 1-1/4" Stroke Sawzall View Diagrams & Manuals
0719-20 Cordless Sawzall View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Exact replacement part!
    Arrived quickly, installed easily, my project was completed without any drama! Thanks!
    Guest - January 4, 2023 Verified Purchase
    Distraction
    Please remove the blue dots on the parts breakdowns
    Kurt - November 27, 2021 Verified Purchase
    My Milwaukee
    My part was easy to find and order, once ordered it arrived in a timely manner and was the correct part.
    Guest - February 18, 2021 Verified Purchase
    Great service!
    The replacement parts were exactly as expected and for a good price too! Quality parts quality service!!! A+++++
    Robert - August 1, 2020 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Shoe Release Lever


    Model number 652021 need shoe release
    Michael for model number B02d612401148 asked on 2022-09-16
    Hello Michael, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:31-52-0090. Thank you for your inquiry, good luck with this repair!
    eReplacementParts Team September 16, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (5 rated repairs)?

    Bought tool and parts were missing

    Coy - November 13, 2015
    👍 3 of 4 people found this instruction helpful
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    I bought a recip saw and there were some parts missing from the nose. The hardest part was removing the rubber boot so I could install the Shoe Retainer. Once the boot was off it only takes one screw to install the retainer. Then I wrestled the boot back in place. The shoe pin is inserted through the hole on the front of the saw. Line up the D-shape of the shoe pin with the release lever and snap the lever onto the pin. Insert the shoe into the front of the saw and lock the lever. Simple!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pin-Shoe lost

    Tomasz - October 11, 2016
    Tool Type

    Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Attached shoe release lever and pushed pin into it. Easy 1 minute job.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Shoe ass'y broke in half

    jerry - July 9, 2016
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed screws and replaced shoe
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pin for release lever was lost.

    Terry - June 8, 2016
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Installed the new pin in the new shoe release lever. Followed the installation instructions that were included with the Quik-Lok Blade Clamp. Then I slid the new shoe assembly in and locked it down.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Shoe lever and pin fell out and got lost.

    Chris - May 28, 2017
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    First of all this was used to fix my orbital sawzall, but that selection was not available. My sawzall was missing the screw( perhaps supposed to be two???), retainer pin, and handle.

    1. Use some silicone spray or WD-40 and spray under the protective boot. This makes it easy to peak off. Remove it.
    2. Place the retainer and using a T-20 or flat headed screw driver secure it with the new screw.
    3. Reinstall the boot.
    4. Install the shoe into the retainer.
    5. Insert the pin.
    6. Pry the handle over the pin. One side of the pin is flat, so it'll only go on one way.
    7. Done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal