Product Information
Description:
This authentic item is supplied directly from the original equipment manufacturer for use with DeLonghi coffee makers. It is a special component which helps to detect whether the water tank is full or empty. Over time it may wear out or get damaged eventually requiring a replacement to ensure your unit functions properly. One high-quality sensor is included. Make sure to refer to the owner's manual and the appropriate diagram for the correct repair procedure. A screwdriver will be needed to take apart and reassemble the housing when replacing this sensor. |
Frequently Purchased With
Compatibility
the 52 compatible machines
This part is compatible with the following machines:
DeLonghi
EAM3200 Magnifica
EAM3300 Magnifica
EAM3400 Magnifica
EAM3400.N Magnifica
EAM3500 Magnifica
EAM3500.N Magnifica
EAM4000.B Magnifica
EAM4400 Magnifica
EAM4500 Magnifica
ESAM3300 Magnifica
ESAM3300.S Magnifica
ESAM3500.N Magnifica
ESAM4400 Magnifica
ESAM4500 Magnifica
ESAM5400 Coffee Maker
ESAM5500.B Coffee Maker
ESAM5500.M Coffee Maker
ESAM6600 Magnifica
ESAM6700 Magnifica
ESAM5600 Coffee Makers
ESAM3500N (0132215019)(X0132215019) Magnifica Digital Espresso And Coffee Machine
ESAM4400 (132214013) Coffee Maker
ESAM6700 (132217008) Primadonna Avant
EAM3500 (0132215003) Magnifica Digital Super Automatic Espresso/Coffee Machine
ESAM2000 (132212063) Caffe Venezia Super Automatic
ESAM5500B (132215047) Perfecta Automatic Espresso, Cappuccino Maker
EAM3300 Magnifica
EAM3400 Magnifica
EAM3400.N Magnifica
EAM3500 Magnifica
EAM3500.N Magnifica
EAM4000.B Magnifica
EAM4400 Magnifica
EAM4500 Magnifica
ESAM3300 Magnifica
ESAM3300.S Magnifica
ESAM3500.N Magnifica
ESAM4400 Magnifica
ESAM4500 Magnifica
ESAM5400 Coffee Maker
ESAM5500.B Coffee Maker
ESAM5500.M Coffee Maker
ESAM6600 Magnifica
ESAM6700 Magnifica
ESAM5600 Coffee Makers
ESAM3500N (0132215019)(X0132215019) Magnifica Digital Espresso And Coffee Machine
ESAM4400 (132214013) Coffee Maker
ESAM6700 (132217008) Primadonna Avant
EAM3500 (0132215003) Magnifica Digital Super Automatic Espresso/Coffee Machine
ESAM2000 (132212063) Caffe Venezia Super Automatic
ESAM5500B (132215047) Perfecta Automatic Espresso, Cappuccino Maker
ESAM4500 (132215030) Fully Automatic Bean To Cup Machine
EAM3200 (132212006) Magnifica Super Automatic Espresso/Coffee Machine
ESAM5400 (132214023) Perfecta Espresso Machine
ECAM28465M (0132215217) Primadonna S Automatic Espresso Machine
ECAM22110B Magnifica Xs Automatic Espresso Machine
ECAM45760B Superautomatic Cappuccino System
EAM3300 (132213001) Magnifica Fully Automatic Expresso
EAM3400 (0132214004) Magnifica Fully Automatic Expresso
ESAM3300EXD Superautomatic Capachino System
ESAM6600 (132215018) Digital Super-Automatic Espresso Machine
ESAM5600SL (132215132) Perfecta Automatic Espresso Machine
ESAM5500M (132215043) Automatic Expresso Maker
ESAM3300EXHD Super Automatic Capachino System
ECAM28465MD Superautomatic Capachino System
EAM4000 (0132212014) Magnifica Expresso
ECAM26455M (132215147) Primadonna S De Luxe Ecam
ECAM25462S (0132215218) Cappuccino Maker
ESAM6620 (132215101) Automatic Espresso Machine
ECAM22110SB Magnifica Xs Automatic Espresso Machine
EAM4500 (132215010) Fully Automatic
ECAM23460 Magnifica S Automatic Espresso Machine
ESAM3300S Magnifica Automatic Espresso/Cappuccino
ECAM23260 Magnifica Smart Cappuccino Machine
ECAM28465B Coffee Maker With Grinder
ECAM23260SB Magnifica S Smart Cappuccino Maker
ESAM04110S Magnifica Automatic Espresso Machine
EAM3200 (132212006) Magnifica Super Automatic Espresso/Coffee Machine
ESAM5400 (132214023) Perfecta Espresso Machine
ECAM28465M (0132215217) Primadonna S Automatic Espresso Machine
ECAM22110B Magnifica Xs Automatic Espresso Machine
ECAM45760B Superautomatic Cappuccino System
EAM3300 (132213001) Magnifica Fully Automatic Expresso
EAM3400 (0132214004) Magnifica Fully Automatic Expresso
ESAM3300EXD Superautomatic Capachino System
ESAM6600 (132215018) Digital Super-Automatic Espresso Machine
ESAM5600SL (132215132) Perfecta Automatic Espresso Machine
ESAM5500M (132215043) Automatic Expresso Maker
ESAM3300EXHD Super Automatic Capachino System
ECAM28465MD Superautomatic Capachino System
EAM4000 (0132212014) Magnifica Expresso
ECAM26455M (132215147) Primadonna S De Luxe Ecam
ECAM25462S (0132215218) Cappuccino Maker
ESAM6620 (132215101) Automatic Espresso Machine
ECAM22110SB Magnifica Xs Automatic Espresso Machine
EAM4500 (132215010) Fully Automatic
ECAM23460 Magnifica S Automatic Espresso Machine
ESAM3300S Magnifica Automatic Espresso/Cappuccino
ECAM23260 Magnifica Smart Cappuccino Machine
ECAM28465B Coffee Maker With Grinder
ECAM23260SB Magnifica S Smart Cappuccino Maker
ESAM04110S Magnifica Automatic Espresso Machine
Products Compatibility
This item works with the following types of products:
- • Coffee Maker
Questions & Answers for Sensor
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Automatic coffee machine did not recognize if there was water in the container to allow operation
1. Replaced wrong sensor initially.
2. Further analyzed operation of machine and identified likely malfunctioning sensor (senses water level of float in water reservoir)
3. Ordered and replaced this sensor.
2. Further analyzed operation of machine and identified likely malfunctioning sensor (senses water level of float in water reservoir)
3. Ordered and replaced this sensor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Torx Bit Socket
Espresso Maker Magnifica XS model ECAM will have a drip light turn on and will not brew
After some investigation and seeing a video of a repair online I order the part. So I removed the back cover by using the Torx bit socket I'm not 100% but I think is the TR20 size removed the water tank and removed the side panel located the sensor is located underside of water tank (middle of unit) used a phillips screwdriver to remove the screw that holds the sensor to the plastic The I located the connector side of the sensor cut the cable tie that was holding wires together and disconnected the sensor from the connector side. After that I installed the new sensor and before putting the unit back together I tested by putting the water tank in place and turning the unit on to make sure the error was gone and tested by brewing a few cups of coffee. put back the covers starting with side panel and then the back panel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The control know for the steam broke, and I replaced the water level sensor at the same time.
1. Removed the water tank and the catch tray from the unit.
2. Removed the back panel, and then the side panels.
3. Removed the control panel.
4. Removed the broken piece of the knob.
5. Unscrewed and replaced the water level sensor
6. Reassembled in the reverse order.
2. Removed the back panel, and then the side panels.
3. Removed the control panel.
4. Removed the broken piece of the knob.
5. Unscrewed and replaced the water level sensor
6. Reassembled in the reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Great results!
Arrived promptly! It did the trick!!! I’m enjoying cappuccino once again with very little trouble.
Vicki -
November 25, 2022
Verified Purchase
Take your time! Correct part, shipped promptly BUT
Part itself, service here no problem. But, in my case I wish I had removed the sensor and tested it directly on the magnetic float, AND I wish I had inspected the PCB plug for this sensor harness more carefully up front. It was poorly mounted to pcb with a gap so that inserting the new plug tore the pcb traces on the back. I had to solder on a jumper and hot glue the plug to repair the pcb, only to find out afterwards that the water containers float had demagnetized enough that it wouldnt trigger the new switch. In my case I just put the old switch harness back on, clipped it, shorted it out to indicate adequate water level. I can visually check this level just fine. Restored function. Anyone want a new sensor? Doubt I can return it, so onto eBay I guess it goes.
Alex -
February 23, 2022
Verified Purchase
Great parts
Fit perfectly
Guest -
October 9, 2021
Verified Purchase
Good part, slow service
The part arrived as described, slow shipping, seller didn't respond to contact request.
iGlobal -
December 7, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information