Easy
15-30 minutes
This is a genuine manufacturer sourced replacement part designed for Senco nailers/staplers. This item provides an air-tight seal for the piston assembly. Over time this seal will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of rubber material and it is sold individually.
Replacing this item you would need a screwdriver and a tool to remove the old seal. Note, when replacing this seal it is good time to check on condition of other o-rings and seals as well.
Seal LB0034
OEM part for: Senco
Part Number: LB0034
$4.99
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 27 machines
Senco
AST-4 Stapler View Diagrams & Manuals
FinishPro 41XP 15 Ga. Finish Nailer View Diagrams & Manuals
FinishPro 42XP 15 Ga. Finish Nailer View Diagrams & Manuals
SFN2 Finish Nailer View Diagrams & Manuals
SN4 Nailer View Diagrams & Manuals
SN70XP Clipped Head Framing Nailer View Diagrams & Manuals
SN1 Nailer View Diagrams & Manuals
SNS45XP 16 Ga. Construction Stapler View Diagrams & Manuals
FinishPro42XP15Ga (4G0001N) "finishpro 42xp, 2-1/2 Inch 15 Gauge Finish Nailer" View Diagrams & Manuals
SFN2C (180004N) Air Nailer View Diagrams & Manuals
SFN2C (190006N) Air Nailer View Diagrams & Manuals
SN-1 (114000) Air Nailer View Diagrams & Manuals
SN70 (170301N) Sn70 Clipped Head Framing Nailer View Diagrams & Manuals
SN70 (170302N) Sn70 Clipped Head Framing Nailer View Diagrams & Manuals
SN70 (170311N) Sn70 Clipped Head 2-1/2-Inch To 4-Inch Framing Nailer View Diagrams & Manuals
SN70 (170312N) Sn70 Clipped Head Framing Nailer View Diagrams & Manuals
SNS45 (580004N) Stapler View Diagrams & Manuals
SNS45 (580101N) Stapler View Diagrams & Manuals
SNS45 (580102N) Stapler View Diagrams & Manuals
SNS45 (580103N) Stapler View Diagrams & Manuals
SNS45 (582001N) Stapler View Diagrams & Manuals
SNS45 (582002N) Stapler View Diagrams & Manuals
SNS45 (582003N) Stapler View Diagrams & Manuals
SNS45 (582004N) Stapler View Diagrams & Manuals
SNS45XP16Ga (580101N) "16 Gauge 7/16"" Cown, Heavy Duty Dual Action Construction Stapler - Sns45xp (Replacement Of 580103n)" View Diagrams & Manuals
SNS45XP16Ga (580102N) 16 Gauge Construction Stapler (Sns45xp) View Diagrams & Manuals
SNS45XP16Ga (580103N) 16 Gauge Construction Stapler (Sns45xp) View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Stapler Parts
- Nailer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fit perfectly worked great.
Several air gun parts, all worked as expected. Gun works perfectly.
James -
May 4, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Seal
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaking air and wouldn’t fire
Scott - February 26, 2024
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
, Allen wrenches
Parts Used
Took the back of the gun apart, 4 Allen bolts.
Took out the old seal that was dry and broken.
Make sure you put the flat part of the seal towards the front of the gun otherwise it won’t seal. I put it on backwards (It’s really hard to take it off once you put it on).
Put it back together and worked great!
Took out the old seal that was dry and broken.
Make sure you put the flat part of the seal towards the front of the gun otherwise it won’t seal. I put it on backwards (It’s really hard to take it off once you put it on).
Put it back together and worked great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Seal broke on piston/drive
Travis - May 6, 2020
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Hex key set
Parts Used
1. Removed head, then the piston.
2. I used a small flat blade screwdriver to remove remaining seal and o-rings.
3. I removed all internal parts and cleaned them before reassembling the nailer. The new seals and o-rings installed very easily. The finish nailer works like new.
4. The cleaning was optional. But after almost 9 years of use, it needed it.
2. I used a small flat blade screwdriver to remove remaining seal and o-rings.
3. I removed all internal parts and cleaned them before reassembling the nailer. The new seals and o-rings installed very easily. The finish nailer works like new.
4. The cleaning was optional. But after almost 9 years of use, it needed it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Did not fire
Larry - August 4, 2018
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Installed all the new seals I ordered. The nylon seal needed to be heated up so it would streach. I put it in a dish of water and microwaved it for one minute on high, that made it just flexible enough to get it on to the piston top.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken seal and worn o-rings.
Michael - July 15, 2018
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Allen set
Parts Used
Removed top and replaced parts as per instructions.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Damaged piston and seals
Steven - April 5, 2017
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Allen wrench
Removed the top of nail gun replaced the worn piston, seals piston and stop.
Cleaned and oiled the inside.
Replaced the top and it worked perfect.
Cleaned and oiled the inside.
Replaced the top and it worked perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
