Medium
30-60 minutes
This authentic OEM approved replacement item made for use with Dewalt planers. The purpose of this screw is to attach the chain cover/bracket to the body. It is made out of metal and it is sold individually.
You would need a screwdriver to install or remove this screw.
Screw 429735-00
OEM part for: DeWALT
Part Number: 429735-00
$4.99
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
DeWALT
DW733 Type 1 12 1/2 inch Planer View Diagrams & Manuals
DW733 Type 2 12 1/2 inch Planer View Diagrams & Manuals
DW733-B2 (Type 2) Planer View Diagrams & Manuals
DW733-B2C (Type 2) Planer Thicknesser Power Tool View Diagrams & Manuals
This item works with the following types of products:
- Planer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fixed my DeWalt Planer
Not sure why this review link is only tied to a single screw I bought, but I bought multiple parts, including feed roller bushings and a drive-chain sprocket that had broken. Arrived very quickly, packed well and pretty inexpensive.
Guest -
May 9, 2023
Verified Purchase
Exact part
The screw was an exact replacement of the original. I can't say that for the rollers that I ordered in the same order. I was able to modify the rollers so I could use them but was disappointed of the situation it caused. I don't think my parts diagram that i downloaded from the web was correct.
Steve -
March 23, 2023
Verified Purchase
Received all my parts in a timely manner.
My planer is up and running. Great place to get replacement parts when needed. Highly recommended.
Guest -
August 23, 2022
Verified Purchase
Delivery a little slow but parts were right and well packaged.
Right parts and planer works like new.
Guest -
February 6, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bushings were worn out and chain was seized up. Thank
Rebecca - January 19, 2019
Tool Type
Planer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Wrench Set
Removed the rollers and the drive chains and replaced them. Also replaced a few screws I stripped out while taking it apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Feet drive sprocket broke
Donald - February 22, 2018
Tool Type
Planer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Screwdriver bit on a wrench
Disassembled drive and replaced sprocked
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bushings on the feed rollers badly worn.
Gerald - December 3, 2017
Tool Type
Planer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Allen wrenches
Disassembled the machine. Cleaned and lubed the roller shafts and the new bushings. Installed the bushings and the new springs. Cleaned and assembled the machine. Bushings appear to be a square cube. They are not. Make sure to put them in correctly. Other than that, the repair went smoothly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Planer rollers would not move wood through planer, roller bushing was shot
John - October 18, 2017
Tool Type
Planer
Difficulty
Expert
Time
More than 2 hours
Tools Used
Screwdriver, Power Drill, Socket set, Wrench Set, Adjustable Wrench, Screw extractor, tap and die
1. Complete disassembly planer
2. Screws holding bushing stripped.
Two screws removed with drill and extractor.
One screw drilled out, hole re-tapped.
Bushing replaced.
Reassemble
Works like a charm
2. Screws holding bushing stripped.
Two screws removed with drill and extractor.
One screw drilled out, hole re-tapped.
Bushing replaced.
Reassemble
Works like a charm
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sprocket broke.
tammy - October 16, 2017
Tool Type
Planer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
1. First, unplugged the planer.
2. Removed the top.
3. Adjusted all the way out.
4. Removed the chain cover.
5. Removed the snap rings 3 of them.
6. Removed the rollers.
7. Cleaned and lubed.
8. Replaced everything in the reverse order.
2. Removed the top.
3. Adjusted all the way out.
4. Removed the chain cover.
5. Removed the snap rings 3 of them.
6. Removed the rollers.
7. Cleaned and lubed.
8. Replaced everything in the reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rear power roller was slipping
Michael - September 21, 2017
Tool Type
Planer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
1. Took cover off
2. Used snap ring pliers to remove c-clips
3. Removed two screws holding one side of roller where the bad bushing was
4. Installed new bushing
5. Removed the drive chain, it appeared stretched, so i just ordered a new one
tightened everything up,..good to go.
I also installed new knives at this time.
Pretty much straight forward.
2. Used snap ring pliers to remove c-clips
3. Removed two screws holding one side of roller where the bad bushing was
4. Installed new bushing
5. Removed the drive chain, it appeared stretched, so i just ordered a new one
tightened everything up,..good to go.
I also installed new knives at this time.
Pretty much straight forward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bushing in rear drive roller was worn out.
Kirk - March 22, 2017
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Snap ring pliers
On a Dewalt planer, removed both side panels, inspected the main drive belt, it was good. Discovered the bushing on the rear drive roller was worn which caused the chain to jump. Using snap ring pliers, I removed the sprockets and chain, then unscrewed the screws holding the roller in position, removed the roller bushings. Inspected all 4 bushing, and only one was bad. Replaced the worn bushing with new, and new chain. The machine works like new again..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
