Screw 530016110

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers

Chain tensioner broken.

1. Removed the cover.
2. Installed the retainer in the cover.
3. Threaded the screw half way through the retainer.
4. Positioned the bar adjust pin on the end of the screw.
5. Threaded the screw the rest of the way into the stop until the retainer is captured.
6. Done! Installed the bar and the chain. Put the cover on with adjusting pin engaged in the bar. Adjusted as needed for proper chain tension.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set, nylon brush (Cleaning)

bar adjustment screw was broke

replaced the screw

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Chain saw blade would not stay tight

1. Removed chain saw blade and bar
2. Replaced the pin, retainer & screw.
3. Replaced bar & blade.
4. Now it works fine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Lost parts of Chain Tension system

The three parts ordered to fix the chain tension system were exactly correct. The repair
was made, tested and completed within 30 minutes.

Removed cover
Removed Bar and chair
Installed 3 chain tension pars
Re-installed cover
Adjusted chain tension
Locked down bar.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Wrench Set

Bar adjustment pin broke and caused the screw stripped.

1. Removed chain bar cover.
2. Removed screw retainer.
3. Removed screw.
4. Threaded retainer onto screw.
5. Threaded bar adjustment pin onto screw.
6. Adusted screw to align bar adjustment pin with adjustment hole in chain bar.
7. Reinstalled chain bar cover.
8. Adjusted chain tension.
9. Tightened cover bolts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Tensioner screw vibrated loose.

1. Removed chain bar cover plate.
2. Loose ends chain .
3. Replaced tensioner screw into tension adjustment piece.
4. Adjusted tension on chain properly.
5. Replaced cover plate.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Retainer-bar Adjust - 530024419

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Stripped adjustment screw

Remove old screw with adjustment nut and replace with a new one

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used: