Repair Parts Home    Power Tool Parts    Porter Cable Parts    13904 Sander Pad (Hook and Loop Velcro Type Paper, 5 Inch)

Sander Pad (Hook and Loop Velcro Type Paper, 5 Inch)

Part Number: 13904
Porter Cable
Availability: 25+ in stock
Leaves our warehouse within 1 business day.
Price: $18.54

  • OEM Porter-Cable replacement sander pad
  • Hook-and-loop (velcro) underside
  • 5-inch diameter
  • Five vacuum holes
This sander pad is compatible with many Porter-Cable random orbit sanders. It is an OEM Porter-Cable replacement part.
The pad features a durable foam body attached to a hard plastic backing plate.
It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has five vacuum holes.

This pad will fit the sanders listed in the "Compatibility" section below.

Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.

Repair Stories
Tool Type:
Parts Used:
Sander Pad (Hook and Loop Velcro Type Paper, 5 Inch) - 13904
Belt - Random Orbit - 903373
Repair Difficulty:
Time Spent Repairing:
15-30 minutes
Tools Used:
The sander pad deteriorated to the point where pieces of the pad were falling off each time it was used.
Removed sanding pad, housing and then replaced the belt, pad and housing. The new belt was a bit difficult to place in the track, but ... it did fit eventually.
Discussion for Sander Pad (Hook and Loop Velcro Type Paper, 5 Inch) - ( 13904 )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  • Comment:
Question: Sander Pad Attachment


My 333 does not have the three bolt holes for attachment of the pad to the support. Were any of these glued on or attached in some other way than is shown in all of the literature?
Reply: Sander Pad Attachment


I destroyed the pad (sometimes patience is not one of my virtues) and found the screws beneath the velcro pad. The velcro pad was an 8 hole variety with 7 holes filled in with some sort of hard adhesive and 4 additional holes drilled. Need a new pad now. If anybody knows why this was done this way, let me know. Inquiring minds and all that. TIA. jo4hn
Question: Porter Cable 333 Sanding Pad


Is there an after market 8 hole pad available
for the Porter Cable 333 Random Orbital sander?
Reply: Porter Cable 333 Sanding Pad


Hello Gustav,

Porter Cable offers a 5 inch pad with 5 holes that are elongated, so you can use 8 hole hook and loop paper. And it works surprisingly well. It is part number 13909.

Hope this helps,
Product Information
Manufacturer: Porter Cable
Category Number: 13904
Classification: Accessory
Weight: 0.10 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
How to Replace the Housing O-Ring on a Porter Cable Sander
Replace your O-ring. Simple instructions for removing and installing the housing O-ring on a Porter Cable palm sander....
October 09, 2015
How to Replace the Pad Bearing on a Porter Cable Sander
Repairing your bearing? Learn to remove and install the pad bearing on your Porter Cable Quicksand sander. Simple instru...
October 09, 2015
Related Products