Sander Pad - Extra Soft (hook 2610917407
Part Number: 2610917407
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: RS030.
Product Information
Description:
This #RS030 Bosch 8-hole sander backing pad has a velcro surface to accommodate hook and loop sandpaper. It is a genuine Bosch brand product. The pad is flexible to allow flat or contour sanding without gouging. It is for use with abrasive discs and polishing bonnets on random orbital sanders. It has a 5"diameter. rnThis sander pad is also cataloged under part numbers 2610917407 and 2608000123. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 10 compatible machines
Products Compatibility
This item works with the following types of products:
- • Sander
Questions & Answers for Sander Pad - Extra Soft (hook
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Broken
1. Removed screw.
2. Pulled old part.
3. Positioned new part.
4. Replaced screw.
2. Pulled old part.
3. Positioned new part.
4. Replaced screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen Wrench
Worn out pad
Removed the center screw from the old worn pad, then removed the pad. I then installed the new pad with the screw that I removed from the old.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Allen wrench
Whore out
Took old pad of ! Put new one in place and tightened the allen screw .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen Wrench
The previous sander pad was old and disintegrated.
Replaced the old sander pad with the new one. Only a single screw using an allen head was needed for the repair. Super easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
, Allen wrench, hammer, vice
The sanding disk pad had deteriorated.
Used an allen wrench to remove the bolt holding the pad on. The bolt had been sealed with loctite to prevent it from vibrating lose, so I had to use a hammer to strike the allen wrench to initiate the bolt breaking lose. Also placed the sander in my vice to hold it securely while replacing the pad. I placed medium strength loctite on the bolt upon reinstallation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Pad wore out
Removed old pad and replaced it with the new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Sander pad had curled, would not hold paper
Easy change out of sander pad , One bolt to remove and reinstall and quickly back to business!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Pad would not hold sand paper
Removed the screw from the middle of the old pad.
Installed the new pad with the same screw
I purchased a soft and hard pad for different sanding applications
Installed the new pad with the same screw
I purchased a soft and hard pad for different sanding applications
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exact Part
Just as advertised this company has the exact part you will need, guaranteed. Customer for life.
Guest -
May 13, 2020
Verified Purchase
Great experience
Very easy to search for parts with a blowup of the sander. Exactly what I needed delivered quickly no problems whatsoever.
Guest -
March 31, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information