Product Information
Description:
This is a genuine Senco replacement part used in compatible finish nailers. The safety element assembly goes between the no-mar pad and the guide. A screwdriver may be needed when replacing this part. It is made out of metal and will need to be replaced if it breaks. This item is available as an individual replacement part and includes a spring. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Safety Element Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
safety mechanism removed by previous owner
its very easy to simply slide the safety assembly into the hole and guide on either side of the feed throat of the nailer. then you just tighten the screw and its all set. I bought my nailer from a pawn shop and the previous owner had for some reason removed the safety on it as well as the tip. easy fix. great website
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Socket set, Adjustable Wrench
Safety element missing
Remove magazine, screw the element into the existing threaded nut, slide the other end of the element into the boss. Replace magazine, test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
, allen wrenches
No mar pad missing and safety element assembly missing parts latch assembly broken
Everything went easy except for the latch, the curve on the latch was to much had to straighten a little, also make sure that if not needing to do, not remove screw from magazine recoil spring, it is not difficult to put back , but can snap back and hit your hand
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Safety attachment broke
Real quick fix, less than 5 min. Just removed dammaged assembly and replaced with new purchased assembly from ReplacementParts. Perfect fit!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Safety was broken
Removed cover removed old spring and broken part. Installed new parts. Very easy. Parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information