Rubber Buffer 6.339-121.0
Part Number: 6.339-121.0
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
Product Information
Description:
| This is an authentic Karcher replacement part that is sourced from the original manufacturer to be used with pressure washers. The rubber buffer fits between the motor bracket and the frame to reduce vibration produced by the engine. This item is sold as an individual replacement part, please note four buffers may be required. A wrench and a hex socket ratchet may be required to install this part. |
Compatibility
This part is compatible with the following machines:
the 7 compatible machines
Products Compatibility
This item works with the following types of products:
- • Pressure Washer
Questions & Answers for Rubber Buffer
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Pressure Washer
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Torx driver
No pressure
Removed engine attached to the pump.
Separated motor and pump.
Separated pump sections. remember, top of pump is full of oil.
Removed bearings and swash plate.
Cleaned thoroughly.
Replaced bearings and swatch plate.
Replaced 2 sets grooved rings (note difference between diagram and parts, one set different than other. check and compare old parts)
Replaced washers and large o-ring
Reassembled
Separated motor and pump.
Separated pump sections. remember, top of pump is full of oil.
Removed bearings and swash plate.
Cleaned thoroughly.
Replaced bearings and swatch plate.
Replaced 2 sets grooved rings (note difference between diagram and parts, one set different than other. check and compare old parts)
Replaced washers and large o-ring
Reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
