This genuine manufacturer sourced replacement part is specially made for use with a variety of handheld lawn and garden equipment. This part is installed on top of the piston/connecting rod. Its purpose is to create a seal in the cylinder so that it can build pressure. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Includes one (1) metal piston ring.
Tools Required: Receptacle for draining fuel, Torx wrenches, spark plug wrench, 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, old starter rope (or similar cord), adjustable pliers, 2-cycle engine oil, razor blade, ignition gapping gauge.
• Remove the air cleaner
• Drain the fuel
• Remove the air cleaner case
• Remove the carburetor
• Remove the intake insulator
• Remove the spark plug
• Remove the engine cover
• Remove the insulator gasket
• Remove the starter assembly
• Remove the fuel tank
• Remove the air duct
• Separate the engine
• Bind the engine
• Remove the clutch
• Remove the flywheel
• Remove the starter pulley
• Unbind the engine
• Remove the muffler
• Separate the cylinder from the crankcase
• Remove the piston ring
• Install the piston ring
Piston Ring 575227901
OEM part for: Husqvarna, Poulan
Part Number: 575227901
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 61 machines
Husqvarna
Poulan
This item works with the following types of products:
- Edger Parts
- Hedge Trimmer Parts
- Trimmer Parts
- Blower Parts
This part replaces obsolete part #: 5300192-83, 530019283
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Piston Ring
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Low compression
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Nutdriver
Parts Used
Runs like new compression went from 60 lb to 120 lb
Scuffed piston and stuck ring
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Power Drill, Socket set, Torx bits, allen bits
Parts Used
ring repair.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, star head screw drivers
Parts Used
Low compression. Would not start.
Tool Type
Blower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set
Parts Used
Also replaced crankshaft seals. Replaced crankcase bottom seals.
Low compression. Would not run
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Adjustable Wrench
Hydraulic lock of piston/piston ring broken on removal/piston would stick
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Torque Heads
Parts Used
The edger motor was seized up.
Tool Type
Edger
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Nutdriver
2. Found the piston ring broken causing the engine to seize up.
3. Replaced the piston ring.
4. Reassembled the edger with the new starter cup spring. I broke the old spring with the motor seized up.
5. Started and used the edger.
Straight gas was ran thru it. Not mixed.
Tool Type
Blower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver, Hex drivers
Removed cylinder head.
Replaced piston and ring. Be sure to install the piston ring in the right direction and that the gap closes on the anti rotation pin.
Reassembled body.
Runs like brand new.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.