Medium
30-60 minutes
This manufacturer-sourced part is specially designed for use with Milwaukee power tools. It is an identical replacement for a damaged or a missing right brush holder assembly that was installed on a new unit. The purpose of this component is to secure the carbon brush around the armature to provide stable and safe contact. It is made of high-quality plastic with metal pieces and is sold individually. Note, the carbon brush and the brush cap are both sold separately. You will need a screwdriver to take the housing apart in order to replace this assembly.
Right Brush Holder Assembly 22-22-1350
OEM part for: Milwaukee
Part Number: 22-22-1350
$5.50
In Stock
Order within the next 17 minutes and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 23 machines
Milwaukee
4240-2 (SER 751-1001) Electric Drill View Diagrams & Manuals
4240 (SER 751-1001) Electric Drill View Diagrams & Manuals
4245-2 (SER 782-1001) Electric Drill View Diagrams & Manuals
4245 (SER 782-1001) Electric Drill View Diagrams & Manuals
4245 (SER 782-2369) Electric Drill View Diagrams & Manuals
1675-1 (SER 413-336097) Two Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472-23375) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472-24725) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472-25501) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472A) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472B) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472C) Single Speed Hole Hawg Drill View Diagrams & Manuals
1670-1 (SER 472D) Single Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413-314575) Two Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413-347251) Two Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413A) Two Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413B) Two Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413C) Two Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413D) Two Speed Hole Hawg Drill View Diagrams & Manuals
1678-20 (SER 930A) Electric Drill / Driver View Diagrams & Manuals
1679-01 (SER 915A) Electric Drill / Driver View Diagrams & Manuals
1670-1 (SER 472E) Single Speed Hole Hawg Drill View Diagrams & Manuals
1675-1 (SER 413E) Two Speed Hole Hawg Drill View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Drill Parts
- Electric Drill Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Right Brush Holder Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
the fields in the drill were burn't and the brush holders were melted.
James - October 24, 2023
Tool Type
Electric Drill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, torxs set
The repair is of a milwaukee 1/2" hole hawg.
1. take handle apart to access the switch and wiring of the fields and brush holders to the switch.
2. take motor housing rear bonnet off to gain access to fields and brush holders.
3. remove armature to get access to removing fields.
4. two screws hold fields in place, removing them and pulling fields from housing noting where field wires go.
5. you can now take brush holders out. there is a right and a left holder, take note where and the lead that is connected to it.
6. reverse order to put in new parts and installing brushes.
7. a lot of times i take pictures to remember where wiring goes and go to manufacturing web site to see exploded view of unit.
1. take handle apart to access the switch and wiring of the fields and brush holders to the switch.
2. take motor housing rear bonnet off to gain access to fields and brush holders.
3. remove armature to get access to removing fields.
4. two screws hold fields in place, removing them and pulling fields from housing noting where field wires go.
5. you can now take brush holders out. there is a right and a left holder, take note where and the lead that is connected to it.
6. reverse order to put in new parts and installing brushes.
7. a lot of times i take pictures to remember where wiring goes and go to manufacturing web site to see exploded view of unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brush housing got hot and welded together
DWIGHT - March 16, 2016
Tool Type
Electric Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Remove the back cover of the drill, then remove and disconnect the brush holders. Place the new brush holders back in place and connect them. Install back cover of the drill. Install the brushes into the brush holders and screw the new brush caps into the drill housing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
