Product Information
Specifications
|
Description:
This is a genuine Ruixing replacement part, it is sold individually. By pressing the bulb, it will purge the carburetor of air. Fuel will be forced up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on How to Replace a Primer Bulb, in our Repair Center. That can be found on the front page of our site. |
Frequently Purchased With
Compatibility
the 60 compatible machines
This part is compatible with the following machines:
Ryobi
CS30 (RY30000A) 30cc String Trimmer
SS30 (RY30002) 30cc String Trimmer
SS30 (RY30002A) 30cc String Trimmer
BC30 (RY30004) 30cc Brushcutter
BC30 (RY30160) 30cc Brushcutter
CS30 (RY26500) Trimmer
RY26540 Brush Cutter
RY09550 Blower / Vacuum
RY09550 Blower / Vacuum
RY09551 Blower / Vacuum
RY09551 Blower / Vacuum
RY28000 26cc String Trimmer
RY28020 (CS26) 26cc String Trimmer
RY28040 (SS26) 26cc String Trimmer
RY09050 Gas Blower/Vac
RY13010 4 Cycle Wheeled Trimmer
RY13050 4 Cycle Wheeled Edger
RY13050A 4 Cycle Wheeled Edger
RY64400 4 Cycle Cultivator
RY09053 2 Cycle Blower / Vacuum
SS30 (RY30002) 30cc String Trimmer
SS30 (RY30002A) 30cc String Trimmer
BC30 (RY30004) 30cc Brushcutter
BC30 (RY30160) 30cc Brushcutter
CS30 (RY26500) Trimmer
RY26540 Brush Cutter
RY09550 Blower / Vacuum
RY09550 Blower / Vacuum
RY09551 Blower / Vacuum
RY09551 Blower / Vacuum
RY28000 26cc String Trimmer
RY28020 (CS26) 26cc String Trimmer
RY28040 (SS26) 26cc String Trimmer
RY09050 Gas Blower/Vac
RY13010 4 Cycle Wheeled Trimmer
RY13050 4 Cycle Wheeled Edger
RY13050A 4 Cycle Wheeled Edger
RY64400 4 Cycle Cultivator
RY09053 2 Cycle Blower / Vacuum
RY09053 2 Cycle Blower / Vacuum
RY09800 2-Cycle Backpack Blower
RY28021 String Trimmer
RY28041 String Trimmer
RY28005 26cc String Trimmer
RY28025 26cc String Trimmer
RY28045 26cc String Trimmer
RY13015 30cc 4-Cycle Wheeled Trimmer
RY09055 Blower/Vacuum
RY09055 Blower/Vacuum
RY09056 Gas Blower/Vac
RY09951 Blower / Vacuum
RY09951 Blower / Vacuum
RY09051 Blower/Vacuum
RY09051 Blower/Vacuum
RY28060 26CC Brush Cutter
RY28065 26CC Brushcutter
RY26BVLG (090155045) Blower/Vacuum
RY28020 26cc String Trimmer
RY28040 26cc String Trimmer
RY09800 2-Cycle Backpack Blower
RY28021 String Trimmer
RY28041 String Trimmer
RY28005 26cc String Trimmer
RY28025 26cc String Trimmer
RY28045 26cc String Trimmer
RY13015 30cc 4-Cycle Wheeled Trimmer
RY09055 Blower/Vacuum
RY09055 Blower/Vacuum
RY09056 Gas Blower/Vac
RY09951 Blower / Vacuum
RY09951 Blower / Vacuum
RY09051 Blower/Vacuum
RY09051 Blower/Vacuum
RY28060 26CC Brush Cutter
RY28065 26CC Brushcutter
RY26BVLG (090155045) Blower/Vacuum
RY28020 26cc String Trimmer
RY28040 26cc String Trimmer
Homelite
Products Compatibility
This item works with the following types of products:
- • Blower
- • Cultivator
- • Edger
- • Trimmer
- • Vacuum
Repair Guides
Articles:
Replacing primer bulbs in small engines is one of the most common types of tool repairs, and this article explains profe...
June 25, 2010
|
Questions & Answers for Primer Bulb
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
23 of 25 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb was cracked
Removed 2 screws holding primer bulb plate, removed defective bulb. Placed the new bulb in place, then screwed the bulb plate back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
10 of 10 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Cracked fuel bulb and hoses leaking on tank.
I removed two phillips head screws that held the fuel bulb in place. I removed the cover and replaced the cracked fuel bulb with the new one. I then removed the fuel tank by removing a center screw. I pulled the two broken lines from the carburetor and placed the new lines on. Then I replaced the center screw back under the new tank. Added fuel, primed with new bulb, and two pulls later the engine roared. eReplacementParts.com made it super easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb cracked
Removed the flange holding the bulb
Removed the old bulb and replaced with the new one
Replaced flange
Removed the old bulb and replaced with the new one
Replaced flange
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb cracked just old
Remove the 2 screws and metal plate remove the old bulb, then put in bulb and replaced the plate, then tightened down the screws..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb cracked
Removed the primer bulb cover
Removed the primer old primmer bulb
Installed the new primer in the holder
Screwed the primer cover back on
Removed the primer old primmer bulb
Installed the new primer in the holder
Screwed the primer cover back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
primer bulb cracked
1. Removed cracked primer bulb using screwdriver to remove 2 screws securing metal plate
2. Installed new primer bulb in reverse order described in #1
2. Installed new primer bulb in reverse order described in #1
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Crack in the primer bulb.
Unscrewed fuel injection and pulled parts apart. Took out old primer bulb and new bulb seated perfectly. Put pieces back together and screw into mower. Make sure screws are tight because an air leak will prevent the blower from running continuously
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb cracked
Removed 2 screws from the bulb cover and cracked bulb.
Clean area install bulb on the cover and screw it on
Clean area install bulb on the cover and screw it on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Tank and fuel lines leaking. Primer bulb split
Loosened the bolts that clamped the fuel tank in place. Removed the 2 fuel lines and tank. Placed new tank where old tank was and tightened bolts. Reconnected the fuel lines. Primer bulb held in place by 2 screws. Removed them, replaced bulb and tightened the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Primer bulb had cracked
Took off retainer ring around old Primer blub and installed new bulb. Job took less than 5 minutes. Blower has never worked better!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
36 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
32
4 stars
2
3 stars
2
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Repair in minutes
The parts arrived within three days and the blower-vac is totally operational again
Charles Lenarduzzi -
June 8, 2023
Verified Purchase
easy repair , great part, works as should
arrived fast got my leaf blower working
Guest -
May 12, 2023
Verified Purchase
Just What I Needed
Thanks so much for coming up with the smallest part that kept my leaf blower from working. Saved $100 at least.
Guest -
December 17, 2021
Verified Purchase
Primer bulb hole
Got a new bulb , gas filter and gas cap. All arrived quickly. Problem solved
Guest -
November 5, 2021
Verified Purchase
Primer Bulb
Could not find the right bulb locally. This was the perfect fit and got my leaf blower running again
Guest -
November 4, 2021
Verified Purchase
easy repair and i am up and running again thank you
arrived quickly great price will use this company again if parts are needed
Guest -
October 11, 2021
Verified Purchase
Happy customer
Parts order were correct when received and are already installed and working fine. Thank you!!!!!!!!
Guest -
August 3, 2021
Verified Purchase
The primer bulb fit perfectly .
The replacement bulb arrived quickly and works as expected.
Guest -
June 26, 2021
Verified Purchase
Easy repair
Just what I needed
Guest -
April 5, 2021
Verified Purchase
Part fit properly and operated properly
Part came in on time and was the exact correct part
Guest -
October 6, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
Repair Guides
Articles:
Replacing primer bulbs in small engines is one of the most common types of tool repairs, and this article explains profe...
June 25, 2010
|