Medium
1-2 hours
This pressure switch is a specially designed replacement part made for use with Bostitch air compressors. The purpose of a pressure switch is to control when compressor should start or stop building up pressure. Commonly if your air compressor is not turning off and on at the specified pressure. Replacing pressure switch, usually should resolve the issue.
Please note to complete this repair you would need a set of wrenches, nut driver set and a thread-sealing tape.
• First make sure to unplug air compressor
• Drain the air tank
• Remove the tank pressure gauge
• Disconnect the pressure switch tube
• Remove the pressure regulator assembly
• Disconnect the wires
• Remove the safety valve
• Remove the old pressure switch
• Install the new one
• Reassemble in reverse order
• Test the air compressor
Pressure Switch AB-9415626
OEM part for: Bostitch
Part Number: AB-9415626
Order within the next 51 minutes and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.75 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 1 machine
Bostitch
This item works with the following types of products:
- Compressor Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pressure Switch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Unit would not turn on unless you manually held the on switch to "on". Reducer was stripped and you could not adjust the regulator.
Tool Type
Compressor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench, Wire strippers/crimpers, Teflon tape
Air compressor would not shut down when it got up to pressue
Tool Type
Compressor
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set
2. Installed the gauges on the new pressure switch.
3. Rewired the switch.
4. Installed the switch on the compressor.
5. Tested the air compressor.
compressos had air leak
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set, Adjustable Wrench, Vice
Parts Used
power cord frade. pressure switch faulty
Tool Type
Compressor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver, Adjustable Wrench
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
