Repair Parts Home Power Tool Parts Porter Cable Parts Porter Cable Reciprocating Saw Parts
Porter Cable 738 TYPE 2 Reciprocating Saw Parts
How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool and appliance cords and switches, the two parts usually responsible for electri...
How to Remove an Armature Bearing with a Vise
This article explains one backup method for removing armature bearings when a bearing puller isn't available.
How to Replace Porter Cable "Recip" Saw Chuck Pins
This article provides step by step instructions for replacing the chuck pins in Porter Cable reciprocating saws, a common power tool part replacement.
Electric Power Tool Parts 101
This article defines the basic parts of most power tools, explains how they work, and what to look for when they stop working.
Discussion for the Porter Cable 738 TYPE 2 Reciprocating Saw
Post a Comment
Ask a question, answer a question, or post a comment!
i have a variable speed saw sall the trigger switch is bad model of swicth is 27-99x 5 wire 115 volt 3.5 to 12 amp is the 883498 the replacement
Below is a list of the tools that the 883468 switch is used in. If one of them is the model number of your saw then it will work just fine.
Hope this helps,
Accessories for the 738