eReplacementParts.com
877-346-4815
Echo Parts
Repair Parts Home  Power Tool Parts  Echo Parts  C305000012 Plate- Sprocket Guard

Plate- Sprocket Guard C305000012

OEM part for: Echo, Shindaiwa

Part Number: C305000012


Install
Videos!
Plate- Sprocket Guard - C305000012:Echo 360 View
Plate- Sprocket Guard - C305000012:EchoPlate- Sprocket Guard - C305000012:EchoPlate- Sprocket Guard - C305000012:Echo 360 View
In Stock
Order within the next 7 hours and your part ships today!
Easy 15-30 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
EchoShindaiwa
Does this d-block d-md-none fit my product?

Product Description ?

This is an Echo replacement part directly sourced from the manufacturer for use in chainsaws. It is made out of metal and helps to direct the motion of the sprocket. Over time this part may become broken and will need to be replaced. During installation, a screwdriver may be needed to replace this item. The sprocket guard plate is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 26 machines

Echo

CS-370 (09001001 - 09014532) Chainsaw View Diagrams & Manuals
CS-370 (09014533 - 09999999) Chainsaw View Diagrams & Manuals
CS-370 (10001001 - 10002200) Chainsaw View Diagrams & Manuals
CS-370 (10002001 - 10999999) Chainsaw View Diagrams & Manuals
CS-370 (C06212001001 - C06212999999) Chainsaw View Diagrams & Manuals
CS-370 (C08011001001 - C08011999999) Chainsaw View Diagrams & Manuals
CS-370 (C08911001001 - C08911999999) Chainsaw View Diagrams & Manuals
CS-370 (C09913001001 - C09913999999) Chainsaw View Diagrams & Manuals
CS-400 (C08111001001 - C08111999999) Chainsaw View Diagrams & Manuals
CS-400 (C09011001001 - C09011999999) Chainsaw View Diagrams & Manuals
CS-400 (C10013001001 - C10013999999) Chainsaw View Diagrams & Manuals
CS-400 (C09212001001 - C09212999999) Chainsaw View Diagrams & Manuals
CS-4200ES (36001001-36999999) Chainsaw View Diagrams & Manuals
CS-420ES (20001001-20999999) Chainsaw View Diagrams & Manuals
CS-420ES (37027771-37999999) Chainsaw View Diagrams & Manuals
CS-370 (09001001-09999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-370 (10001001-10999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-370 (C33514001001-C33514999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-370 (C33714001001-C33714999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-370 (C69515001001-C69515999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-400 (C08111019801-C08111999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-400 (C33714001001-C33714999999) Chainsaw Lawn Equipment View Diagrams & Manuals
CS-400 (C69715001001-C69715999999) Chainsaw Lawn Equipment View Diagrams & Manuals

Shindaiwa

402s (C37414001001-C37414999999) Gasoline Chainsaws View Diagrams & Manuals
402s (C37513001001-C37513999999) Gasoline Chainsaws View Diagrams & Manuals
402s (C69915001001-C69915999999) Gasoline Chainsaws View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Chain Saw Parts
  • Saw Parts

This part replaces obsolete part #: C305000011

Repair Videos ?

Watch the Repair Video for Plate- Sprocket Guard

Customer Part Reviews ?

4
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • MATCHES ORIGINAL PART
    Time and continued use will reveal the actual quality of this part. This replacement exactly matched the original part and appears to be of equal quality in material and manufacturing. Delivery was a day earlier than promised.
    Guest - September 3, 2019 Verified Purchase
    Echo CS 400 Sprocket Guard
    Part seems to wear out easily , maybe I am tighten the 2 blade nuts too tight . Feedback welcome . Used Echo Bar & Chain oil always
    Guest - October 27, 2022 Verified Purchase
    eReplacementParts Team
    Hi Steven, Thank you for your review. We appreciate your feedback. We will be in touch with you shortly regarding the sprocket guard plate.
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Plate- Sprocket Guard


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (5 rated repairs)?

    Chain guides worn on Echo chain saw

    Dennis - November 13, 2015
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Nutdriver, none

    Remove the side cover just like if you were replacing the chain. The guide plates are held in place with a couple small screws. Remove them and install the new ones. It is a good idea to do a really good cleaning while the plates are removed. Be careful to not lose the bar adjuster while the plate is removed. The chain catcher was also damaged on my saw. Just one additional screw to replace it. Super easy.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bevel gears were worn from heavy use.

    Kim - August 26, 2020
    I removed the bar and chain from the unit, then with a phillips head screw driver, I removed the sprocket guard and lifted out the two small bevel gears, chain tensioner, tensioner bolt and collar which are one small unit. I replaced these with the new parts. I then replaced the chain and bar and replaced the housing. I was then back in business.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The plate was worn almost cut in half.

    Julio - January 19, 2019
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Nutdriver, Air compressor

    1. Removed the clutch cover assembly.
    2. Cleaned and inspected.
    3. Replaced clutch cover adjustment screw guard plate (two screws).
    4. Reinstalled the clutch cover assembly.
    5. Inspected work performed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Chain was eating up the guides

    Stephen - January 20, 2017
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Socket set

    Remove the sprocket guard
    Remove the bar and blade
    Replace the sprocket plate and the guide plate and install the new ones
    Assemble in reverse order
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The plate guard was broken

    Ken - June 25, 2016
    Tool Type

    Chain Saw

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set

    Removed the sprocket guard removed three screws. Put the new parts in place, and replaced the screws. Then replaced the sprocket guard, and tightened the chain.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal