Easy
15-30 minutes
Genuine Milwaukee replacement part, it is sold individually.
The 45-16-0495 Pivot Shoe Assembly is used to be pressed up against the material that the Sawzall is cutting.
It aids in cutting a straight and accurate line.
It will pivot so the saw can be used at different angles.
Pivot Shoe Assembly 45-16-0495
OEM part for: Milwaukee
Part Number: 45-16-0495
$7.98
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.23 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 78 machines
Milwaukee
6507 (SER 631-1018736) Sawzall View Diagrams & Manuals
6535-6 (SER 748E) Saw View Diagrams & Manuals
6512 (SER 483-108000) Saw View Diagrams & Manuals
6511 (SER 460-732526) Saw View Diagrams & Manuals
6508 (SER 748-24000) Sawzall View Diagrams & Manuals
6535-6 (SER 748D) Sawzall View Diagrams & Manuals
6512-4 (SER 600B) Sawzall View Diagrams & Manuals
6512-4 (SER 600A) Sawzall View Diagrams & Manuals
6500 (SER 73-169844) Sawzall View Diagrams & Manuals
6510 (SER 284-257845) Sawzall View Diagrams & Manuals
6510 (SER 284-183656) Sawzall View Diagrams & Manuals
6511 (SER 460-244899) Sawzall View Diagrams & Manuals
6507 (SER 631B) Sawzall View Diagrams & Manuals
6511 (SER 460A) Sawzall View Diagrams & Manuals
6512-4 (SER 600-9400) Sawzall View Diagrams & Manuals
6535 (SER 748C) Sawzall View Diagrams & Manuals
6506 (SER 541-1001) Sawzall View Diagrams & Manuals
6507-20 (SER 182A) Sawzall View Diagrams & Manuals
6511 (SER 460C) Sawzall View Diagrams & Manuals
6509 (SER 808-1001) Sawzall View Diagrams & Manuals
6512-4 (SER 600C) Sawzall View Diagrams & Manuals
6510 (SER 284-141681) Sawzall View Diagrams & Manuals
6507 (SER 631-431000) Sawzall View Diagrams & Manuals
6511 (SER 460-1277363) Sawzall View Diagrams & Manuals
6511 (SER 460D) Sawzall View Diagrams & Manuals
6535 (SER 748B) Sawzall View Diagrams & Manuals
6511 (SER 460B) Sawzall View Diagrams & Manuals
6507 (SER 631C) Sawzall View Diagrams & Manuals
6512 (SER 483-47000) Sawzall View Diagrams & Manuals
6511 (SER 460-255000) Two-Speed Sawzall View Diagrams & Manuals
6535 (SER 305-1001) 12V Sawzall View Diagrams & Manuals
6508 (SER 748-1001) Sawzall View Diagrams & Manuals
6508 (SER 748-426235) Sawzall View Diagrams & Manuals
6508 (SER 748-478116) Sawzall View Diagrams & Manuals
6508 (SER 748A) Sawzall View Diagrams & Manuals
6508 (SER 748B) Sawzall View Diagrams & Manuals
6510 (Ser 284-73587) Two-Speed Sawzall View Diagrams & Manuals
6510 (Ser 284-28166) Two-Speed Sawzall View Diagrams & Manuals
6510 (Ser 284-247445) Two-Speed Sawzall View Diagrams & Manuals
6500 (SER 73-86881) Sawzall View Diagrams & Manuals
6500 (SER 73-103592) Sawzall View Diagrams & Manuals
6505 (SER 335-1001) Electronically Controlled Sawzall View Diagrams & Manuals
6505 (SER 335-2456) Electronically Controlled Sawzall View Diagrams & Manuals
6505 (SER 335-4212) Electronically Controlled Sawzall View Diagrams & Manuals
6506 (SER 541-14000) Trigger Speed Control Sawzall View Diagrams & Manuals
6506 (SER 541-54500) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-1001) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-159357) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-188000) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-220000) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-349000) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631-946110) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631A) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631D) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631E) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631F) Trigger Speed Control Sawzall View Diagrams & Manuals
6507 (SER 631G) Sawzall View Diagrams & Manuals
6509 (SER 808A) D.I. Sawzall View Diagrams & Manuals
6509 (SER 808B) D.I. Sawzall View Diagrams & Manuals
6509 (SER 808C) D.I. Sawzall View Diagrams & Manuals
6509 (SER 808D) D.I. Sawzall View Diagrams & Manuals
6511 (SER 460-1001) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-29908) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-130000) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-246188) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-700000) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-838000) Two Speed Sawzall View Diagrams & Manuals
6511 (SER 460-1302847) Two Speed Sawzall View Diagrams & Manuals
6512 (SER 483-1001) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483-104000) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483-109350) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483-122000) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483-159892) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483-162042) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6512 (SER 483A) Two Speed Double Insulated Sawzall View Diagrams & Manuals
6535 (SER 305-1901) 12 Volt Sawzall View Diagrams & Manuals
6535 (SER 305-2096) 12 Volt Sawzall View Diagrams & Manuals
6535 (SER 748A) Dual Range Vari-Speed Sawzall View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
This part replaces obsolete part #: 45-16-0055
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
10
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
restoring old tool
ereplacementparts has always provided what i need to bring old tools like new again. My tool collection is now looking great!
Jim -
December 4, 2023
Verified Purchase
Back in operation
Wasn’t too sure it would work but had to take the chance. Works perfect-pivot shoe was a perfect fit on my old saws-all two speed. Fast delivery quick response. Thank you
Guest -
December 26, 2022
Verified Purchase
easy repair, fit perfect
easy repair, perfect fit
Patrick -
September 8, 2020
Verified Purchase
Great product and price
Great product and price. Fit perfect. Thanks.
Guest -
May 5, 2020
Verified Purchase
worked as expected
bolted rite in.
Guest -
January 4, 2020
Verified Purchase
awesome, simple, replacement
by being able to replace this piece we were able to fix the tool cheaply. thanks so much
Guest -
September 30, 2019
Verified Purchase
Milwaukee pivot shoe
Excellent item
ALBERT -
September 2, 2019
Verified Purchase
Perfect replacement
Fit as a perfect replacement
Guest -
July 24, 2019
Verified Purchase
Good as NEW
Ordered replacement parts for job site saws-all excellent all round Thanks.
Larry -
July 19, 2019
Verified Purchase
everything went smoothly
the shoe for my saws-all installed quickly, an exact fit
Guest -
May 10, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pivot Shoe Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sawzall not cutting straight
David - May 25, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Removed 4 Alan screws, removed old pivot shoe. Put new shoe in place and re-installed allen screws. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Noise when operating and typical wear from the usage.
John - July 13, 2017
Tool Type
Jig saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
1. Removed the cover and the end cone.
2. Removed the old bearing.
3. Cleaned the old parts that were reused.
4. Assembled with the new bearing, the seal and the blade guide.
5. Packed with new grease.
2. Removed the old bearing.
3. Cleaned the old parts that were reused.
4. Assembled with the new bearing, the seal and the blade guide.
5. Packed with new grease.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord wires broke from normal use. Shoe was damaged from demolition work.
James - November 3, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Very easy, insert cord end and twist locking collar. Back retaining screws out and install new shoe.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bracket assembly fell apart
james - October 26, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
1. Remove broken foot and screw
2. Hold down the bracket
3. Clean the foot assembly
4. Install the new foot and screw
5. Hold down the bracket then position saw properly in tool and test.
2. Hold down the bracket
3. Clean the foot assembly
4. Install the new foot and screw
5. Hold down the bracket then position saw properly in tool and test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing parts, shoe rusty and worn out.
Gregg - October 20, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Allen wrench
Remove rubber saw cover and replaced guide shoe.
Install blade holder on drive shaft.
Install blade holder on drive shaft.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw shoe got bent, was worn out. Heat shield was torn and petrified.
Jack - September 10, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Removed old parts
Cleaned sawzall with solvent
Installed new parts
Went back to work.
Cleaned sawzall with solvent
Installed new parts
Went back to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing blade clamp and pivot shoe
Jeff - August 9, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
The project was a used Milwaukee Sawzall I purchased for $6 missing the parts I bought below.
I stripped, cleaned and lubed it and surfaced the commutator with fine emery cloth.
I mounted the blade clamp and secured it with the provided screw.
I affixed the pivot shoe assembly with screws I provided, as the 10-24 X 1/2" Pan HD.
I stripped, cleaned and lubed it and surfaced the commutator with fine emery cloth.
I mounted the blade clamp and secured it with the provided screw.
I affixed the pivot shoe assembly with screws I provided, as the 10-24 X 1/2" Pan HD.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pivot Shoe broken.
Loretta - July 6, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Loosen the screws on the sides of the housing and pull out the old pivot shoe. Slide the new shoe in and tighten the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Purchased a used Milwaukee sawzall. It had some missing and worn parts.
michael - June 6, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Installed a new boot by sliding it over the gear case. I then replaced the blade clamp by screwing it to the blade shaft. Replace the shoe by screwing two screws into the gear housing and slid it in and tightening the screws with the the hex key. Lastly I removed the brush caps and brush springs and replace the worn brushes. It's like having a new sawzall. The parts arrived promptly, and were easy to install. Thanks,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade clamp broke and the pivot shoe was broke
Dennis - June 12, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Nutdriver
Very simple pull the rubber shoe off the front and take out 4 hex head screws that holes the pivot assembly and replace. Did not have to pull rubber shoe off just made it easy to get the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
