Install
Videos!

G 160 Pistol - 2.641-959.0:Karcher 360 View

Watch The
Repair Video

G 160 Pistol 2.641-959.0

Part Number: 2.641-959.0

6 Reviews

Order within the next 4 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 4.762-290.0, 26412030, 4.775-424.0, 26412020 and 4.775-389.0.

Product Information

Description:

This manufacturer sourced replacement part designed for use with Karcher pressure washers. It is the essential part of the unit allowing to direct and control the spray. Please note the wand is sold separately. This pistol assembly is made out of plastic and it is sold individually.

Warning: California's Proposition 65

Frequently Purchased With

O-ring Seal 6x..
$3.99

Compatibility

This part is compatible with the following machines:

Karcher

Expand the 73 compatible machines

Products Compatibility

This item works with the following types of products:

• Pressure Washer

Questions & Answers for G 160 Pistol

Sort by

searching for replacement gun, withhose which might screw onto this now obsolete machine...hose thread approx 7/8"OD w/20 threads per inch.

Jon for model number K430 asked on 2023-05-12

Hi Jon, Thank you for your question. The part number for the gun and hose is 2.643-910.0. We hope this helps!

Related Parts: Gun And Hose (new Style. May R

Looking for a new pistol for a pressure washer model 395M

Leonard asked on 2022-10-27

Hello Leonard, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 2.641-959.0. Thank you for your inquiry, good luck with this repair!

I have the "trigger gun" which has the hose going into the end of the handle. What is the correct gun to order. thank you!

Alex for model number Karcher K 5.85 M asked on 2022-09-21

Hello Alex, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:2.643-910.0. Thank you for your inquiry, good luck with this repair!

Related Parts: Gun And Hose (new Style. May R

Will this pistol fit my machine? The hose goes into the pistol grip on the washer I currently have. This one seems to connect just in front of the grip.

Ben for model number K3.86 asked on 2022-07-22

Hello Ben, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 2.641-959.0. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Repair Instructions: Submitted by Customers Like You

7 of 7 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, none

Freezing had split tube inside pistol

1. Removed the old pistol which sprayed water everywhere'
2. Easily replaced it with new pistol. Just inserted pressure hose into new pistol although sliding lock pin puzzled me for a minute or two.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 4 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Clamp - 5.037-137.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Use my shed key to pull out the old retaining clamp

This is a relpacement part that doesn't look exactly like the original. Trust me, it works and is a better construction than the original.

Just pull the old one off the hose. Put on the new one, and push the retaining clamp in all the way. There isn't a lot of information about the change in design for the new handle, but go ahead and order with confidence. It fits.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 6 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Broken handle

Pulled back the clamp and removed the hose from the old pistol. Put the hose in the new pistol and pressed in the clamp.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

3 of 3 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools needed.

The plastic tube inside the old pistol grip split open and leaked water. The tube is between the grip hose connection and the grip valve.

1. Bought new pistol grip.
2. Pushed old hose end into new grip, and pushed new retainer (which came with the new grip) into the grip to secure the hose.

The new pistol grip is a different design than my old grip, apparently eliminating the plastic tube inside the grip, or at least shortening the tube's length. On my old pistol grip, the hose attached at the bottom of the grip. On the new grip, the hose now attaches above the bottom of the grip, in front of the trigger. The old hose fits into the new grip fine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Damaged pistol.

Replaced the gun.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

pistol leaked badly (due to, I figure, freezing damage to some interior part.

Simply removed retaining clip, inserted hose into pistol, pushed retainer in and that was it!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools needed

My power washer trigger handle developed a leak ( probably frozen)

1. Removed the nozzle wand (press in and twist) from broken handle.
2. Remove water supply hose from other end of handle(press and twist) from broken handle.
3. Insert end of water supply hose into trigger end of handle(press and twist).
4. Insert nozzle wand into other end(press and twist). Done!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

trigger was broken

Replaced trigger

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers

Nothing

Put the new handle on the old hose and inserted the retainer clip. This was a slightly different configuration than my old pistol on my K1600 unit, but it fit perfect and my pressure washer works like new. Great job guys and I look forward to doing business with you again in the future. Thanks again!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Pressure Washer

Parts Used:

G 160 Pistol - 2.641-959.0

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Torx driver

Pressure washer wand didn't work.

Replaced the pressure washer wand.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

6 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Worked as expected

Fast shipping . Like the new design better than original

Guest - October 19, 2023 Verified Purchase

The part I needed

Spoke with a very helpful person on the phone who made sure I got the part I needed and now my 16 year old pressure washer is working great again. Good company with excellent service.

Guest - September 20, 2023 Verified Purchase

Fit my over 10 yrs old pressure washer just fine

So glad I could get this part instead of buying a new pressure washer! Thank you for stocking it!!!

Guest - June 13, 2023 Verified Purchase

got part

I Got the parts and installed everything work good

Guest - June 8, 2021 Verified Purchase

Fast Correct Fix

Got the part, quick connection to the hose and works like a charm. Doesn’t look exactly the same but a perfect replacement. You can’t go wrong here.

Guest - May 15, 2021 Verified Purchase

Replacement pistol for Karcher Pressure Washer

New part arrived quickly. Although it looked different than original, it fit like a dream and worked perfectly!

Guest - May 20, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information