Medium
1-2 hours
This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made from flexible clear plastic and it is sold individually.
Pipe-fuel-2.5x4x105 6692353
OEM part for: Tanaka
Part Number: 6692353
$5.19
In Stock
Order within the next 14 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 38 machines
Tanaka
TBL-455 Backpack Blower View Diagrams & Manuals
TCS-3301PFS 32cc Chainsaw View Diagrams & Manuals
TCS-3401 Professional Pruning Saw View Diagrams & Manuals
TCS-3401S Professional Pruning Saw View Diagrams & Manuals
DR-270PN Extended Reach Pole Saw View Diagrams & Manuals
TPS-270PN Extended Reach Pole Saw View Diagrams & Manuals
TED-210 Gas Drill View Diagrams & Manuals
TBL-4610 Backpack Blower View Diagrams & Manuals
TBL-500 Backpack Blower View Diagrams & Manuals
TBL-505 Backpack Blower View Diagrams & Manuals
ECS-290 Chainsaw View Diagrams & Manuals
ECS-300 Chainsaw View Diagrams & Manuals
TPS-2510 Extended Reach Pole Saw View Diagrams & Manuals
TPS-270PF Extended Reach Pole Saw View Diagrams & Manuals
TPE-270PF Portable Edger View Diagrams & Manuals
TPE-270PN Portable Edger View Diagrams & Manuals
HTD-2520PF Hedge Trimmer View Diagrams & Manuals
HTD-2522PF (C230891) 22" Hedge Trimmer View Diagrams & Manuals
HTD-2522PF (C230890) 22" Hedge Trimmer View Diagrams & Manuals
HTD-2526PF 26" Hedge Trimmer View Diagrams & Manuals
HTD-2530PF Low Emission 30" Hedge Trimmer View Diagrams & Manuals
THT-2100 Hedge Trimmer View Diagrams & Manuals
THT-210S Hedge Trimmer View Diagrams & Manuals
THT-2120 Hedge Trimmer View Diagrams & Manuals
THT-2510 30" Hedge Trimmer View Diagrams & Manuals
THT-2520 30" Hedge Trimmer View Diagrams & Manuals
THT-2530 30" 24cc 1.3HP Single Sided Hedge Trimmer View Diagrams & Manuals
THT-2540 40" 24cc 1.3HP Single Sided Hedge Trimmer View Diagrams & Manuals
TPH-270PF Articulating Pole Hedge Trimmer View Diagrams & Manuals
TPH-270PN Articulating Pole Hedge Trimmer View Diagrams & Manuals
TBC-250 Grass Trimmer / Brush Cutter View Diagrams & Manuals
TBC-270PFD Brush Cutter View Diagrams & Manuals
TBC-265 Brush Cutter View Diagrams & Manuals
THT-210SA Hedge Trimmer View Diagrams & Manuals
TCS-3351PFS 32cc Rear Handle Chainsaw View Diagrams & Manuals
HTS-2530PF 24cc, 30" Single-sided Blades, Hedge Trimmer View Diagrams & Manuals
PB-SE801 (Moby-X26) BladeZ 26cc Gas View Diagrams & Manuals
TWS-250 24cc Screed Engine View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Blower Parts
- Chain Saw Parts
- Saw Parts
- Pole Saw Parts
- Drill Parts
- Edger Parts
- Hedge Trimmer Parts
- Trimmer Parts
- Engine Parts
This part replaces obsolete part #: 70002004150, 70002004105, 7000250406, 70002504080, 70002504105, 70002504100, 70002504095, 7000250408, 7000250407, 7000250421, 70002504090
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pipe-fuel-2.5x4x105
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fuel leaking from the tank
Mike - September 14, 2018
Tool Type
Pole Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
0. Remove the remaining fuel from the tank. Using a funnel I put the fuel back into my 1 gallon gas can.
1. Removed the air cleaner cover.
2. Removed the hardware holding the tank in place.
3. Disconnect the fuel lines at the carburetor and primer, paying close attention to which line goes where.
4. Installed the new vent, return line and fuel line and filter into the new tank.
5. Removed the old primer and installed the new one.
6. Attached the new fuel lines to the correct places on the primer and carburetor.
7. Placed the new tank into position using the mounting bracket and screws attached the tank to the engine.
8. Filled the tank with fuel.
At this point I tried to start the saw, it would not start. I found that I had flooded the carburetor when I was checking the operation of the new primer.(guess I primed it one to many times!) Removed the spark plug then, using compressed air I dried the inside of the cylinder and the spark plug, reassembled and started the saw.
9. Installed the new air cleaner I had purchased and reinstalled the air cleaner cover.
10. Put the saw back to work trimming trees.
1. Removed the air cleaner cover.
2. Removed the hardware holding the tank in place.
3. Disconnect the fuel lines at the carburetor and primer, paying close attention to which line goes where.
4. Installed the new vent, return line and fuel line and filter into the new tank.
5. Removed the old primer and installed the new one.
6. Attached the new fuel lines to the correct places on the primer and carburetor.
7. Placed the new tank into position using the mounting bracket and screws attached the tank to the engine.
8. Filled the tank with fuel.
At this point I tried to start the saw, it would not start. I found that I had flooded the carburetor when I was checking the operation of the new primer.(guess I primed it one to many times!) Removed the spark plug then, using compressed air I dried the inside of the cylinder and the spark plug, reassembled and started the saw.
9. Installed the new air cleaner I had purchased and reinstalled the air cleaner cover.
10. Put the saw back to work trimming trees.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor stopped up, fuel lines rotten ,fuel filter bad ,primer pump bad & air filter rotten. The hedge trimmer had not been cranked in 10 years
Hurbert - December 28, 2015
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wire with hook on one end
Removed carburetor to a access fuel lines & primer pump, used wire with hook to remove the fuel filter. I replaced the fuel line fuel filter & primer pump. Then I dissembled the carburetor cleaned it in my ultrasonic cleaner resembled, reinstalled, checked the compression 110 lb. cranked it up it ran fine, oiled the blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
