eReplacementParts.com
877-346-4815
Ryobi Parts

Install
Videos!
Grid squares measure 1x1 inch
Use 915-0143 - 715-0143:MTDUse 915-0143 - 715-0143:MTDUse 915-0143 - 715-0143:MTDUse 915-0143 - 715-0143:MTDUse 915-0143 - 715-0143:MTD

Use 915-0143 715-0143

Part Number: 715-0143
MTDRyobiYard MachinesTroy-BiltBolensYard ManCraftsmanCub CadetHusky
Availability: In Stock
Price: $4.99
Ships within 1 business day

*This part replaces obsolete part #: 915-0143, GW-1185348, 915-0143 (for Faster Service Obtain Standard Nuts, Bolts and Washers Local) and 1185348.

Product Information
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Ryobi
MTD
Yard Machines
Troy-Bilt
Bolens
Yard Man
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Edger
  • • Snowblower

Questions & Answers for Use 915-0143


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Use 915-0143 - 715-0143
Gear-worm 20t - 917-04861
Repair Difficulty:
Easy
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
Worm gear thrust bearing spring pin broke,damaging worm gear
1. Remove blower from power unit
2. Remove blower, auger and drive assembly
3. Disassemble auger gear assembly
4. Replace worm gear and thrust bearing pin
5. Reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Worm Shaft - 717P0526
Use 915-0143 - 715-0143
Gear-worm 20t - 917-04861
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Socket set, rotary tool
Worm shaft and gear stripped
Removed housing from snow blower to gain access to bolt holding the worm shaft. removed worm assembly and disassembled. Removed blower fan from old worm shaft by drilling out pins. (drilling pins was the hardest part). Used rotary tool to grind high spots of shaft so I could remove the worm gear. Scraped and sanded sides of auger assembly to remove old silicone. Filled auger assembly with grease and installed new shaft and worm gear. Put auger assembly back together with silicone. Put blower fan on new shaft with pins and installed into housing. Attached housing to snowblower. Mounted belts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal