eReplacementParts.com
877-346-4815
Porter Cable Parts

Pin 890724

OEM part for: Porter Cable

Part Number: 890724


Install
Videos!
Pin - 890724:Porter Cable 360 View
Pin - 890724:Porter CablePin - 890724:Porter CablePin - 890724:Porter Cable 360 View
In Stock
Order within the next 14 hours and your part ships today!
Easy Less than 15 minutes (14 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter Cable
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Porter Cable hardware which is sourced from the original manufacturer for use with nailers and staplers. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the diagrams for your model to ensure the exact location and the correct application of this component. This high-quality part is made of durable metal and is sold individually. You may need pliers to remove and secure this pin.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 24 machines

Porter Cable

FC350 Type 2 Clipped Head Framing Nailer View Diagrams & Manuals
FC350 Type 3 Clipped Head Framing Nailer View Diagrams & Manuals
BN125 Brad Nailer View Diagrams & Manuals
BN200 Brad Nailer View Diagrams & Manuals
COIL250 Type 1 2.5" Coil Nailer View Diagrams & Manuals
COIL250 Type 2 2.5" Coil Nailer View Diagrams & Manuals
DA250 15 Gauge Angle Nailer View Diagrams & Manuals
DA250A 15 Gauge Angle Nailer View Diagrams & Manuals
FC350A Type 1 Clipped Head Framing Nailer View Diagrams & Manuals
FC350A Type 2 Clipped Head Framing Nailer View Diagrams & Manuals
FCP350 Clipped Head Framing Nailer View Diagrams & Manuals
FR350 Type 3 Round Head Framing Nailer View Diagrams & Manuals
MS200 Type 1 16 Gauge Medium Crown Stapler View Diagrams & Manuals
MS200 Type 2 16 Gauge Medium Crown Stapler View Diagrams & Manuals
NS150 Narrow Crown Stapler View Diagrams & Manuals
NS100 Type 1 1" NC Stapler Kit View Diagrams & Manuals
FR350 Type 2 Round Head Framer View Diagrams & Manuals
J-NS100 (Type 1) 1in Nc Stapler Kit View Diagrams & Manuals
BN125 (Type 1) 1 1/4in Brad Nailer Power Tool View Diagrams & Manuals
BN200 (Type 1) 2in Brad Nailer Kit Power Tool View Diagrams & Manuals
DA250 (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
DA250A (Type 1) 2 1/2in Angle Nailer Power Tool View Diagrams & Manuals
FCP350 (Type 1) 3-1/2in Hp Ch Framer Power Tool View Diagrams & Manuals
NS150 (Type 1) 1 1/2innc Stapler Kit Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts
  • Stapler Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • No hassle
    It worked
    Guest - September 19, 2020 Verified Purchase
    Porter Cable DA250A Repair
    Repaired my old Porter Cable nail gun. I’m glad to see these parts still mostly available.
    Guest - November 16, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Pin


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (14 rated repairs)?

    The pin holding the trigger in on my Brad nailer fell out

    Ron - December 31, 2015
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , A hammer

    Parts Used
    All I did was to press the pin through the gun and trigger, then push the urethane retainer on the end of it to hold it all together.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Trigger retaining pin falling out

    Eric - May 14, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , No tool required

    1. Replaced retaining pin.
    2. Installed urethane ring on pin.
    3. Done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    clip for pin honding trigger assembly fell off and lost the pin

    WILLIAM - December 19, 2019
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers

    Parts Used
    Bought new parts and installed them
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pin fell out and trigger fell off during operation. Urethane retainer on pin came off and was lost.

    Paul - October 1, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers

    Lined up trigger with pin hole and inserted pin and retainer. eReplacementparts phone operator identified the urethane retainer on list, but it was not shown on the manufacturers schematic nor on my list that came with the tool. Good job by eReplacementparts. Nose cushion wore out and was easy to replace.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Original pin on my nail gun lost the retainer clip then the pinon the trigger.

    Tracy - September 19, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , No tool required

    Simply inserted the new pin and placed the retaining clip on the end.

    The biggest challenge was finding a replacement part. Your site made it simple.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Urethane retainer broke

    Daniel - August 5, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Put a new pin and retainer in and was good as new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Retainer on the nail gun had fallen off and I could not find it.

    Edmondo - April 6, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Took the pin and put it in it's place to keep trigger in line. Then I snapped the retainer over the tip of the pin and all was complete in less than 2 minutes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Trigger came off

    William - March 17, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers

    Replaced the pin and the retainer and all was OK.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Above was a simple repair of a trigger that hinged on the pin and retainer ring that popped on.

    r - May 9, 2017
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    I was ordering a more difficult part to find, and added the pin/retainer while I was at it. I had been using tape to hold the pin from falling out, thus freeing the trigger from it's pivot.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    E-ring lost, protective cover broke,

    Charles - April 2, 2017
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced e-ring on new pin, installed new cover
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal