Product Information
Description:
This is the o-ring for the seal, please make sure to check appropriate diagrams for correct location and use of this item. It is supplied directly from original equipment manufacturer for use with Porter Cable nailers. One high quality rubber o-ring is included per order. Over time it may deteriorate and crack eventually requiring replacement. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for O-ring Of Rubber
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Wrench Set
Leak in top
Needed a plastic gasket and 2 O-rings. Got the O-rings first and then realized I needed the plastic gasket.. It was obvious to see because the old gasket was in pieces
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Worn seals and o-rings
Removed the four screws from the top cover
Removed and replaced the worn parts listed
Cleaned the inside of the gun and oiled it
Screwed the top cover back on
Tested it, works like new
Removed and replaced the worn parts listed
Cleaned the inside of the gun and oiled it
Screwed the top cover back on
Tested it, works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen Wrench
Air leaking due to bad seals
I opened the gun and replaced the parts, closed it back up and used the nailer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information