Easy
15-30 minutes
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are specified by the inside diameter and the thickness.
Of the many causes for O-Ring failure, the most common among power tools are:
Extrusion and Nibbling– O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.
Abrasion–One or both sides of the o-ring appear rough and slightly flattened.
Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication.
Over Compression –O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.
Heat Hardening–O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
Weather/Ozone Cracking–O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
O-ring 608611-00
OEM part for: DeWALT
Part Number: 608611-00
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 18 machines
DeWALT
This item works with the following types of products:
- Nailer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for O-ring
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Dewalt Framing Nailer with air leak from the front of the nailer.
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Allen wrench
Parts Used
Framing nailer leaking high volumes of air through the driving pin area.
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
2. Extracted main air cylinder firing pin.
3. Wiggled and extracted main air cylinder.
4. Replaced main cylinder O-ring.
5. Wiped down all components and inner air chamber with WD-40.
6. Greased and lubricated all seals, firing pin, and cylinder walls with a thin grease and pneumatic tool oil.
7. Dismantled nail magazine and lubricated track.
8. Cleaned and lubricated safety head and moving parts.
9. Cleaned and lubricated main air chamber seal.
10. Reassembled entire nailer.
11. Added a few drops of pneumatic tool oil to male air quick connect.
12. Cleaned exterior air chamber with WD-40.
Needed o-ring
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Pulled out piston
Put o-ring in place on piston
Gun stopped working. Took it apart, noticed many O-rings got over heated and stretched or ripped
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver, Nail Set
Air escaping out the nozzle/nail end.
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Allen
Parts Used
Nail gun was not holding air
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Nailer fired at will
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
Parts Used
o-rings
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set
Nailer was leakkng air & wouldn't fire.
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Torx set, snap ring pliers
Would not hold air pressure
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Allen head to fit in socket
Gun.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
