eReplacementParts.com
877-346-4815
Porter Cable Parts

O-ring 883924

OEM part for: Porter Cable

Part Number: 883924


Install
Videos!
O-ring - 883924:Porter Cable 360 View
O-ring - 883924:Porter CableO-ring - 883924:Porter CableO-ring - 883924:Porter Cable 360 View
In Stock
Order within the next 3 hours and your part ships today!
Medium 15-30 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter Cable
Does this d-block d-md-none fit my product?

Product Description ?

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.

Of the many causes for O-Ring failure, the most common are:

Extrusion and Nibbling
• O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.

Abrasion
• One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication.

Over Compression
• O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.

Heat Hardening
• O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.
Weather/Ozone Cracking
• O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 23 machines

Porter Cable

BN125A Brad Nailer View Diagrams & Manuals
BN200A Brad Nailer View Diagrams & Manuals
BN200V12 Type 1 Cordless Brad Nailer View Diagrams & Manuals
BN200V12 Type 2 Cordless Brad Nailer View Diagrams & Manuals
DA250 15 Gauge Angle Nailer View Diagrams & Manuals
DA250A 15 Gauge Angle Nailer View Diagrams & Manuals
MS200 Type 1 16 Gauge Medium Crown Stapler View Diagrams & Manuals
MS200 Type 2 16 Gauge Medium Crown Stapler View Diagrams & Manuals
NS100A Narrow Crown Stapler View Diagrams & Manuals
BN138 18 Ga. 1-3/8" Brad Nailer View Diagrams & Manuals
BN200B 18 Ga. 2" Brad Nailer View Diagrams & Manuals
NS150A Type 1 1-1/2" Stapler View Diagrams & Manuals
NS150A Type 2 1-1/2" Stapler View Diagrams & Manuals
NS150B Type 1 18Ga 1/4In Crown Stpl View Diagrams & Manuals
FN250 Type 1 2-1/2" Finish Nailer View Diagrams & Manuals
NS100B Type 1 18 Ga. 1" Narrow Crown Stapler View Diagrams & Manuals
BN125A (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
BN138 (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
BN200A (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
BN200B (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
DA250 (Type 1) Finish Nailer Power Tool View Diagrams & Manuals
DA250A (Type 1) 2 1/2in Angle Nailer Power Tool View Diagrams & Manuals
NS100A (Type 1) Stapler Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts
  • Stapler Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy repair. Quick delivery
    Orings in perfect package. Installed and now have a brand new mailer. Thanks for the help!
    Guest - February 25, 2022 Verified Purchase
    Porter cable stapler
    Parts were right on spot and had them in the time frame that they were supposed to be here
    Guest - March 15, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for O-ring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 15-30 minutes (2 rated repairs)?

    Bumper broke

    mel - April 28, 2017
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    , Allen wrench

    Removed the screws from the top housing and removed it. Removed the driver unit,cylinder and bumper and replaced the o-rings. piston ring and driver guide. Replace all of the parts and oiled the interior of the nail gun, then replaced the top cap.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Stapler would not fire

    Kevin - December 13, 2016
    Tool Type

    Stapler

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    , Allen wrench and plumbers grease

    Replaced several o-rings and up and running again. The top gasket was in good shape so I just lightly coated it with plumbers grease and all is well. P.S. Also lightly lubed o-rings with same plumbers grease.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal