Easy
15-30 minutes
This is an authentic manufacturer-sourced part which is specially designed for use with Porter Cable nailers. It helps to provide an air-tight seal between connected components. Unfortunately, over time it may wear out and get damaged eventually requiring a replacement. Make sure to refer to the owner's manual for your model to ensure the proper repair procedure. Note, this high-quality O-ring is made of durable rubber and is sold individually. A Hex key also is known as an Allen wrench to take the housing apart when replacing this component.
O-ring 886082
OEM part for: Porter Cable
Part Number: 886082
$3.99
In Stock
Order within the next 4 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 6 machines
Porter Cable
FC350 Type 1 Clipped Head Framing Nailer View Diagrams & Manuals
FC350 Type 2 Clipped Head Framing Nailer View Diagrams & Manuals
FC350 Type 3 Clipped Head Framing Nailer View Diagrams & Manuals
FR350 Type 1 Round Head Framing Nailer View Diagrams & Manuals
FR350 Type 3 Round Head Framing Nailer View Diagrams & Manuals
FR350 Type 2 Round Head Framer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Nailer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for O-ring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Air was blowing/leaking out of the top of the nail gun
William - June 11, 2023
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed and removed the head of the nailer.
Pulled out the cylinder
Replaced two o rings on cylinder
Replaced seal on bottom of cylinder
Put it back together.
Pulled out the cylinder
Replaced two o rings on cylinder
Replaced seal on bottom of cylinder
Put it back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
framing nailer blowing air through exhaust
Victor - January 29, 2019
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, allen wrenches
Parts Used
Removed top from tool. Cleaned out fragments of old piston stop which was completely destroyed. Replaced with new piston stop, seal and o rings. Replaced top. I had found detailed instructions on You Tube.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking air
Dan - March 9, 2018
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Removed the screws from the top cap and removed it
Removed the worn o-ring and seal
Installed the new o-ring and seal
Cleaned and oiled the inside of the gun
Replaced the top cap
Works great
Removed the worn o-ring and seal
Installed the new o-ring and seal
Cleaned and oiled the inside of the gun
Replaced the top cap
Works great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Piston bumper deteriorated inside the gun
Matt - May 26, 2017
Tool Type
Nailer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Hex wrench
Repair was easy and cost effective. All I did was watch the video first to see if I wanted to tackle the project. When it was over discovered there really isn't a lot of parts inside to keep me from trying it. So, I disassembled the nailer and found the source- broken piston bumper. I could see all kinds of plastic pieces scattered throughout the internal workings of the gun. After a good cleaning and a check of all the o-rings, the top portion of the nailer would have to be replaced. Next, I ordered the parts from the website which was simple and easy- in fact I also found a part to my Porter Cable sander as well. After a few short days the parts arrived and I put the gun back together, plugged it into the compressor and tried it out. "P-ka," the nailer was once again making that sweet sound that my wife can't stand.
Now if I had to buy the complete overhaul kit I'm not too sure I would have fixed the nailer. Reason being, the big box stores are always having a sale and a new one could be found for 30-50 dollars more with a one year warranty. Unless, I already had an abundance of nails that were specific to the old nailer then I would fix the old one.
Good Luck with your project and may the force be with you!
Now if I had to buy the complete overhaul kit I'm not too sure I would have fixed the nailer. Reason being, the big box stores are always having a sale and a new one could be found for 30-50 dollars more with a one year warranty. Unless, I already had an abundance of nails that were specific to the old nailer then I would fix the old one.
Good Luck with your project and may the force be with you!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not drive any nails
Richard - October 13, 2016
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Allen wrench, soft face mallet
1. Disassembled the nail gun using the video from this web site.
2. Cleaned all the parts and inspected them for any damage.
3. Lubed all the parts and reassembled the nail gun.
4. Before loading any nails I dry fired the nail a few times.
5. I then loaded 3 1/2 nails and tested the gun, it worked as good as new.
2. Cleaned all the parts and inspected them for any damage.
3. Lubed all the parts and reassembled the nail gun.
4. Before loading any nails I dry fired the nail a few times.
5. I then loaded 3 1/2 nails and tested the gun, it worked as good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Air was leaking out the top of the nail gun
John - January 20, 2016
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
I removed the top cap and found that the o-ring was torn and the seal was broken. I replaced them both. Now the nail gun works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
