eReplacementParts.com
877-346-4815
Porter Cable Parts

O-ring 886079

OEM part for: Porter Cable

Part Number: 886079


Install
Videos!
O-ring - 886079:Porter Cable 360 View
O-ring - 886079:Porter CableO-ring - 886079:Porter CableO-ring - 886079:Porter Cable 360 View
In Stock
Ships within 1 business day
Easy 30-60 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter Cable
Does this d-block d-md-none fit my product?

Product Description ?

This is an authentic manufacturer-approved replacement part which is specially designed for use with Porter Cable staplers and nailers. It helps to provide an air-tight seal for the base, please make sure to check appropriate diagram of your model for correct location and use of this item. Over time the material may begin to deteriorate and crack eventually requiring replacement to maintain the top performance. Please note this high-quality rubber o-ring is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 10 machines

Porter Cable

RN175 Type 1 Roofing Nailer View Diagrams & Manuals
RN175 Type 2 Roofing Nailer View Diagrams & Manuals
RN175A Roofing Nailer View Diagrams & Manuals
FN250A Finish Nailer View Diagrams & Manuals
COIL200 2" Coil Nailer View Diagrams & Manuals
NSS150 Super Narrow Crown 18 Gauge Stapler View Diagrams & Manuals
COIL200 (Type 1) 2in Coil Nailer Kit Power Tool View Diagrams & Manuals
RN175A (Type 1) Coil Roofing Nailer Power Tool View Diagrams & Manuals
FN250A (Type 1) 2 1/2in Finish Nailer Power Tool View Diagrams & Manuals
NSS150 (Type 1) Super 1.5 Nc Stapler Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts
  • Stapler Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
1 Review
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fits perfectly , and fast delivery 👌
    Was ordered and received very quickly also parts fit perfectly
    MARCOS - July 18, 2023 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for O-ring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 30-60 minutes (2 rated repairs)?

    Nailer won't fire, only leaked air while the trigger was depressed in the trigger area

    Michael - February 16, 2019
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Socket set, Wrench Set, Dental Pick

    Disassembled the trigger and then removed the trigger valve from the body of the gun using a socket. I replaced all of the O-rings in the trigger area and lubricated them with the oil that comes with the gun. I then reassembled the valve and screwed it back into the gun body. I reassembled the trigger making sure that the safety worked as it is designed to. The gun worked properly after the repair and continues to at this point. I am satisfied that the O-rings were the cause of the problem.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Leaking air and not firing

    Johann - September 9, 2017
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    , Allen wrench

    Removed the four allen head screws from the cylinder cap and removed it
    Removed the cylinder and cleaned the inside of the gun
    Installed all of the o-rings, piston stop and gasket
    Oiled the insides of the gun
    Replaced the cylinder cap
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal