Product Information
Description:
This is an authentic Porter Cable replacement part that is intended to be used with drywall sanders and spindle sanders. The switch fits into the motor housing near the speed control. This item is used to relay electricity from the power cord to the speed control or motor assembly. The switch is sold as an individual replacement part. |
Compatibility
the 18 compatible machines
This part is compatible with the following machines:
Porter Cable
121 Oscillating Spindle Sander
7800 Type 1 Drywall Sander
7800 Type 2 Drywall Sander
7801 Drywall Sander
259385 Type 2 Drywall-Sander
259485 Type 1 110V Drywall-Sander
9444VS Variable Speed Profile Sander
7800 Type 3 Drywall Sander 3.5 Amp
J-444 Type 1 Profile Sander
7800 Type 1 Drywall Sander
7800 Type 2 Drywall Sander
7801 Drywall Sander
259385 Type 2 Drywall-Sander
259485 Type 1 110V Drywall-Sander
9444VS Variable Speed Profile Sander
7800 Type 3 Drywall Sander 3.5 Amp
J-444 Type 1 Profile Sander
J-444 Type 2 Profile Sander
9444 (Type 1) Profile Sander
PC9444 (Type 1) Profile Sander Kit
PC9444 (Type 2) Profile Sander Kit
121 (Type 1) Osc Spl Sander Power Tool
7800 (Type 4) Drywall Sander3.5amp Power Tool
7800 (Type 5) Drywall Sander3.5amp Power Tool
7801 (Type 1) Drywallsndr-Hoseless Power Tool
9444VS (Type 1) Vs Profile Sander Power Tool
9444 (Type 1) Profile Sander
PC9444 (Type 1) Profile Sander Kit
PC9444 (Type 2) Profile Sander Kit
121 (Type 1) Osc Spl Sander Power Tool
7800 (Type 4) Drywall Sander3.5amp Power Tool
7800 (Type 5) Drywall Sander3.5amp Power Tool
7801 (Type 1) Drywallsndr-Hoseless Power Tool
9444VS (Type 1) Vs Profile Sander Power Tool
Products Compatibility
This item works with the following types of products:
- • Sander
Questions & Answers for On/off Swth Flex 230
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
The on/off switch was bad
Remove the screws from the motor housing. Remove the terminals from the old switch and put them on the new switch. Remove the dust cover from the old switch and put it on the new switch. Place the new switch in its place and screw the motor housing back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information