On/off Switch 1607200086
Part Number: 1607200086
Order within the next 10 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 1981000657.
Product Information
Description:
This is a Rocker switch that has 2 prong terminals and 2 screw terminals with the screws in them. This genuine Bosch replacement part is sold individually. Switches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: |
Frequently Purchased With
Compatibility
the 42 compatible machines
This part is compatible with the following machines:
Bosch
1347A (0601347066) 4-1/2" Mini Grinder
1347A (0601347266) 4-1/2" Mini Grinder
1348AE (0601348764) 5" Mini Grinder
1533A (0601533139) 10 Gauge Nibbler
1534 (0601534139) 16 Gauge Nibbler
B9150 (0603273235) Mini Grinder
1348E (0601348739) 5" Mini Grinder
1370DEVS (0601370739) 6" Random Orbit Sander / Polisher
1370DEVS (0601370739) 6" Random Orbit Sander / Polisher
B1650 (0603228135) Plate Joiner
1702 (1981000696) Vacuum
GGS27C (0601210739) Straight Grinder
1347 (0601347039) Angle Grinder
1347A (0601347267) Angle Grinder
1347A (0601347271) Angle Grinder
1348 (0601348039) Angle Grinder
1702AE (0601702739) Angle Grinder
GWS9-125CE (0601344739) Angle Grinder
GWS9-125CS (0601343039) Angle Grinder
GWS9-150C (0601345739) Angle Grinder
PWS5-115 (0603278039) Angle Grinder
1347A (0601347266) 4-1/2" Mini Grinder
1348AE (0601348764) 5" Mini Grinder
1533A (0601533139) 10 Gauge Nibbler
1534 (0601534139) 16 Gauge Nibbler
B9150 (0603273235) Mini Grinder
1348E (0601348739) 5" Mini Grinder
1370DEVS (0601370739) 6" Random Orbit Sander / Polisher
1370DEVS (0601370739) 6" Random Orbit Sander / Polisher
B1650 (0603228135) Plate Joiner
1702 (1981000696) Vacuum
GGS27C (0601210739) Straight Grinder
1347 (0601347039) Angle Grinder
1347A (0601347267) Angle Grinder
1347A (0601347271) Angle Grinder
1348 (0601348039) Angle Grinder
1702AE (0601702739) Angle Grinder
GWS9-125CE (0601344739) Angle Grinder
GWS9-125CS (0601343039) Angle Grinder
GWS9-150C (0601345739) Angle Grinder
PWS5-115 (0603278039) Angle Grinder
PWS5-115 (0603278139) Angle Grinder
1534 (0601534039) Nibbler
GNF20CA (0601612634) Wall Chaser
GWS 7115 (0601800032) Angle Grinder
GWS 9125 (0601801014) Angle Grinder
GWS 9125 (0601801015) Angle Grinder
GWS 9125 (0601801016) Angle Grinder
GWS 9125 (0601801034) Angle Grinder
GWS 10125C (0601802734) Angle Grinder
0601348314 Angle Grinder
PWS 6115 (0603278435) Combi-Angle Grinder
PWS 6115 (0603278445) Angle Grinder
GGS 7 C (0601212703) Straight Grinders
GGS 7 C (0601212708) Straight Grinders
GGS 7 C (0601212732) Straight Grinders
GGS 7 C (0601212741) Straight Grinders
GGS 7 C (0601212750) Straight Grinders
GUF 22 A (0601607039) False Joint Cutter
GUF 422 A (0601607139) Gw Universal Router
0601612739 Wall Chaser
1534 (0601534039) Nibbler
GNF20CA (0601612634) Wall Chaser
GWS 7115 (0601800032) Angle Grinder
GWS 9125 (0601801014) Angle Grinder
GWS 9125 (0601801015) Angle Grinder
GWS 9125 (0601801016) Angle Grinder
GWS 9125 (0601801034) Angle Grinder
GWS 10125C (0601802734) Angle Grinder
0601348314 Angle Grinder
PWS 6115 (0603278435) Combi-Angle Grinder
PWS 6115 (0603278445) Angle Grinder
GGS 7 C (0601212703) Straight Grinders
GGS 7 C (0601212708) Straight Grinders
GGS 7 C (0601212732) Straight Grinders
GGS 7 C (0601212741) Straight Grinders
GGS 7 C (0601212750) Straight Grinders
GUF 22 A (0601607039) False Joint Cutter
GUF 422 A (0601607139) Gw Universal Router
0601612739 Wall Chaser
Skil
Products Compatibility
Questions & Answers for On/off Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Bench vise
On-off switch would not turn on
Removed grinder outer housing. Removed 4 wires from switch and removed. Install new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wire stripper
Angle grinder would not start
Took the end housing off the grinder. Took a photo of the wiring on the switch to be sure where to reattach the wires. I removed the wires and unscrewed the screws holding the switch down. Removed the switch and cut off the ends of the wires and stripped the insulation from the ends of the wires to expose good wire. Screwed the new switch in place and reattached the wires. Screwed the housing back on the grinder and the job was done. The grinder works like new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Soldering iron, electrical tester
Switch would not work
Removed rear of unit which revealed the switch and brushes
Removed wiring from switch and applied a continuity test
Replaced switch and elected to replace the electrical cord as well. Used the soldering iron to stiffen the cord ends
Reinstalled the rear cover and tested.
Removed wiring from switch and applied a continuity test
Replaced switch and elected to replace the electrical cord as well. Used the soldering iron to stiffen the cord ends
Reinstalled the rear cover and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Worn out
Remove the screw from the end housing cover
Make a wiring diagram of the switch and where the internal parts are placed
Disconnect the wires from the switch.
Remove the old cord and slide it through the hole in the back cover, place the grommet on the cord. Connect the wires to the switch and hook up the internal parts.
Screw on the end housing cover
Make a wiring diagram of the switch and where the internal parts are placed
Disconnect the wires from the switch.
Remove the old cord and slide it through the hole in the back cover, place the grommet on the cord. Connect the wires to the switch and hook up the internal parts.
Screw on the end housing cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Problems turning on unit
1. Remove rear screw on handle/case and slide away from head.
2. Remove and replace brushes and switch.
3. Replace case and insert rear screw.
2. Remove and replace brushes and switch.
3. Replace case and insert rear screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The 4.5" angle grinder would not turn on after 19 years in the fiberglass industry. Dust got to it!
Had previously taken the grinder apart and tested the switch an found it was not working after 19 years of grinding fiberglass. Since the switch could not be taken apart and repaired, i replaced it with a new one purchased from your Company. Since the grinder was already apart, it took only 5 minuets to install the switch and put the casing back on. It started up with no problems. Fantastic site. I will return for any parts I might be looking for.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
exact same as original
revieved the part timely and tool was back in service quickly
Guest -
June 5, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information