Medium
15-30 minutes
This is an authentic OEM sourced replacement tank that is specially designed for use with Poulan handheld lawn and garden equipment. It is made of high-quality plastic and is sold individually, over time it may wear out or get damaged eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item.
Oil Tank 576896501
OEM part for: Poulan
Part Number: 576896501
$5.29
In Stock
Order within the next 1 hour and your part ships today! 
Compatibility
This part will fit the following 3 machines
Poulan
PLN1510 Pro Pole Pruner View Diagrams & Manuals
PLN1514 Pro Electric Chainsaw View Diagrams & Manuals
PLN1510 Pro Pole Pruner View Diagrams & Manuals
This item works with the following types of products:
- Pruner Parts
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Quick delivery
Parts came quickly, they were exact replacement parts.
Steve -
May 4, 2022
Verified Purchase
Fast shipping
Part worked great and super fast shipping.
Thanks
Trav
Guest -
April 13, 2020
Verified Purchase
Easy repair
The part was in perfect condition, arrived quickly, was easy to replace an reasonably priced.
Guest -
October 12, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Oil Tank
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Oil tank was leaking
Kenneth - September 11, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Remove side cover, two screws.
2. Remove chain and bar, two 1/2" nuts.
3. Remove bar adjuster plate and old spillage pad, chain sprocket and associated bearings and gears.
4. Remove 4 screws from chain saw side body, slightly split the body to allow room to pull out the old oil tank and install he new.
5. Clean all parts and reverse for assembly.
2. Remove chain and bar, two 1/2" nuts.
3. Remove bar adjuster plate and old spillage pad, chain sprocket and associated bearings and gears.
4. Remove 4 screws from chain saw side body, slightly split the body to allow room to pull out the old oil tank and install he new.
5. Clean all parts and reverse for assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil tank cracked, saw blade dull
Dave - July 23, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Removed cover
Removed old oil tank
Installed new oil tank
Install new anti spillage pad
Installed new chain
Reinstalled covers
Removed old oil tank
Installed new oil tank
Install new anti spillage pad
Installed new chain
Reinstalled covers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
oil leaking out
Phil - April 11, 2019
Tool Type
Pruner
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
opened the the pruner, removed the oil tank and cap and replaced with the new part. Re-assembled pruner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil Tank had a crack, leaked oil
TED - October 12, 2018
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Parts Used
1. Removed side cover, two screws.
2. Removed chain and bar, two 1/2" nuts.
3. Removed bar adjuster plate (1 Small screw) and spillage pad. (Note location and
orientation of small rubber spillage pad)
4. Remove 4 screws from chainsaw body, split case enough to remove old oil tank.
5. Clean all parts and reverse for assembly.
2. Removed chain and bar, two 1/2" nuts.
3. Removed bar adjuster plate (1 Small screw) and spillage pad. (Note location and
orientation of small rubber spillage pad)
4. Remove 4 screws from chainsaw body, split case enough to remove old oil tank.
5. Clean all parts and reverse for assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil lubricator had failed cracked and oil leaked out anti spillage pad did not exist since new
JAMES - June 26, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
remove side cover with phillips screw driver. Used a wrench to remove the bar and chain. Removed and loosened several screws to allow the room to pull the plastic oil reservoir out after removing the oil cap. cleaned all oil wood chips and gunk from the area of the reservoir and surrounding area. reinstalled the new reservoir and reinstalled the screws removed to access the reservoir. placed the new Anti spillage pad on the tank. placed the cleaned bar and chain over the output drive gear. Replaced the hex nuts and adjuster plate while adjusting the chain tension with a standard flat blade screwdriver.. Replaced the chain cover and screws and tightened. Refilled the tank with oil and primed and lubricated the chain prior to testing for proper operation.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
