Product Information
Description:
Genuine Manufacturer Sourced replacement part designed to fit some Craftsman Air Compressors. This part is made out of Plastic and it is Sold Individually. This part connects to the Crank Case Cover securing the oil inside. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 11 compatible machines
Products Compatibility
This item works with the following types of products:
- • Compressor
Questions & Answers for Oil Fill Cap
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 6 people found this instruction helpful
Tool Type:
Compressor
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Cylinder cap was cracked and leaking motor oil
Drained any remaining oil,
Removed the 4 cylinder cap screws with an 8 mm socket, slowly removed the cap and the rubber gasket came off the motor leaving a clean surface.
Replaced and applied the new gasket and installed the cylinder end cap and tightened the 4, 8mm screws by hand and being careful to not over tighten and cracked the cap.
Removed the 4 cylinder cap screws with an 8 mm socket, slowly removed the cap and the rubber gasket came off the motor leaving a clean surface.
Replaced and applied the new gasket and installed the cylinder end cap and tightened the 4, 8mm screws by hand and being careful to not over tighten and cracked the cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
piece broke off
Removed broken part and replaced with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools needed
Broken oil fill cap
I simply screwed in the new oil fill cap. It fit perfectly and screwed down tightly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
It needed a new filter and the oil cap was broken.
I replaced the filter and the broken oil cap. I would like to say that I felt that price and the quality of the replacement parts were very good.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand tight
Oil fill cap was broken off at the threads
1. Used a knife to act like a screw extractor to remove the the male threads broken off in the oil fill hole of the compressor.
2. Installed the replacement cap, hand tight.
2. Installed the replacement cap, hand tight.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, An \\
Old filler plug broke off at housing surface.
Old filler plug broke off at housing,removed threaded piece in housing,installed new filler plug.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
CAME WITHOUT FILTER AND OIL CAP
INSTALLED PARTS ON REQUIRED PLACE.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
I broke oil fill cap on compressor
1. Removed broken piece using large blade screwdriver.
2. Screwed new oil fill cap in place. Hand tightened.
2. Screwed new oil fill cap in place. Hand tightened.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand tighten
Oil cap thread had broken off original cap
Just replace the broken cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Compressor
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Oil cap broke. Couldn't get part even from the manufacturer. Great service.
Replaced oil cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
42 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
39
4 stars
3
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Easy
Great!!!
Guest -
November 8, 2023
Verified Purchase
Exactly what I needed.
It was a perfect part to replace the broken filler cap. Compressor is back working.
Guest -
May 24, 2023
Verified Purchase
exact replacement for the oil fill on the craftsman air compressor
exact fit, just make sure you screw it down snug with a pair of pliers...otherwise it will spray oil. once i snugged it down it was fine
Guest -
May 15, 2023
Verified Purchase
Just like original
Replacement fit perfect. Made of plastic so be very careful not to cross thread or over tighten. Original is plastic also. Thanks for the breakdown sheet on compressor. This made it easy to order the correct item.
Lenora -
April 15, 2023
Verified Purchase
Perfect!
Brand new, perfect fit, fast shipping!
Guest -
September 28, 2022
Verified Purchase
replacement craftsman oil filler cap
part was an exact match.
Guest -
August 11, 2022
Verified Purchase
This was definitely the right part, but it didn't fix the problem.
The arrived in great condition. Thanks
Guest -
July 7, 2022
Verified Purchase
worked as expected
worked well on my compressor
Guest -
December 29, 2021
Verified Purchase
Excellent part
The part fit perfectly. Quick shipping as well.
Horace -
August 9, 2021
Verified Purchase
I ordered,it got shipped in a timely manner,I am happy with what I got.
It looks just like the original part and fits.
David W. -
July 31, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information