Product Information
Description:
A genuine item which is supplied by the original manufacturer for use with Makita rotary demolition hammers. It is a special o-ring which is utilized to provide an air-tight seal for the tool holder set, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement, keep in mind this high-quality rubber o-ring is sold individually. |
Frequently Purchased With
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
- • Rotary Hammer
Questions & Answers for O Ring 27
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Rotary Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, allen Wreanch set
striker and impact bolt was broken.
unscrew end of hammer and replace the parts and the diagram made it easy that you show ,thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Allen Wrench set
Impact bolt broke, causing hammering action to stop.
Removed the bottom portion of the hammer off, dissemble the hammer shaft and replaced all the O rings, checked the bearings,replaced the impact bolt, cleaned all parts, lubed parts and reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information