This is a genuine OEM replacement part designed for use with a variety of power tools. It is made out of metal and it is sold individually. It is a standard hardware which has multiple applications based on your tool.
You would need a wrench to tighten/loosen this nut.
Nut,hex 330015-03
OEM part for: DeWALT, Porter Cable, Delta, Black and Decker
Part Number: 330015-03
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 490 machines
Porter Cable
DeWALT
Delta
Black and Decker
This item works with the following types of products:
- Chop Saw Parts
- Saw Parts
- Table Saw Parts
- Miter Saw Parts
- Circular Saw Parts
- Drill Parts
- Drill Press Parts
- Band Saw Parts
- Scroll Saw Parts
- Sander Parts
- Planer Parts
- Compressor Parts
- Shaper Parts
- Jig saw Parts
- Pole Saw Parts
- Tile Saw Parts
- Trim Saw Parts
- Jointer Parts
- Lathe Parts
- Radial Arm Saw Parts
- Grinder Parts
- Router Parts
- Engine Parts
- Polisher Parts
This part replaces obsolete part #: 5134622-00, 491964-00, 1243398
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Nut,hex
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Missing Handle to Lock Rip Fence in Place
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Tap
Parts Used
Height Adjustment Screw was worn out
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Adjustable Wrench
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
Dried out bearing, causing noise and eventually blade wobble and missing nut on blade adjustment wheel
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, 6 point torx bits
I took out the 5 torx screws behind the blade which has the slide plate sandwiched in it, this splits and loosens the motor.
My bad bearing was pressed into the gear case cover, and was in pieces. I had to replace the whole gear case cover to get the new bearing which included the second bearing that was pressed on the shaft. I did reuse the rubber o ring which could be replaced.
I cleaned out and replaced grease.
Reinstalled motor making sure 4 glide pads are in place.
New nut on blade adjustment wheel may need loctite.
Replaced the power switch that had gone bad and the handle for the fence
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.