eReplacementParts.com
877-346-4815
Senco Parts
Repair Parts Home
  
Power Tool Parts
  
Senco Parts
  HC0401 Non-marking Contact Pad

Non-marking Contact Pad HC0401

OEM part for: Senco

Part Number: HC0401


Install
Videos!
Non-marking Contact Pad - HC0401:Senco 360 View
Non-marking Contact Pad - HC0401:SencoNon-marking Contact Pad - HC0401:SencoNon-marking Contact Pad - HC0401:Senco 360 View
In Stock
Order within the next 13 hours and your part ships today!
Easy 15-30 minutes (12 rated repairs)?
OEM: Original Equipment Manufacturer ?
Senco
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Senco replacement part, it is sold individually.
The No Mar Pad Contact is attached to end of the Safety assembly to prevent the material that it is being used on from getting marred or dented by the Safety assembly.

It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time. And get lost.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 5 machines

Senco

FinishPro 32 16 Ga. Finish Nailer View Diagrams & Manuals
FinishPro 32MG 16 Ga. Finish Nailer View Diagrams & Manuals
FinishPro 35 15 Ga. Angled Finish Nailer View Diagrams & Manuals
FinishPro3216Ga (1X0201N) Finishpro 32 16 Gauge Finish Nailer View Diagrams & Manuals
FinishPro3515Ga (1Y0001N) 15 Gauge Finish Nailer Finishpro35 View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Nailer Parts

Customer Part Reviews ?

4.6
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Very grateful to be able to get the part my husband needed and it came quickly!
    Excellent service.
    Guest - October 20, 2021 Verified Purchase
    Worked as expected
    Received in a timely manner and fit correctly.
    Guest - September 15, 2021 Verified Purchase
    The part was exactly as listed and shipment went without any glitch. I will definitely do business with them again.
    Part was exactly as listed.
    Guest - July 15, 2020 Verified Purchase
    Perfect fit
    Easy to install.
    Brad - March 27, 2020 Verified Purchase
    nail gun repair
    Tip was not disabling, but it's nice to have.
    Billy - April 19, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Non-marking Contact Pad


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (12 rated repairs)?

    Lost the no mar pad.

    Loren - August 28, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Pushed on with fingers.

    Too easy, just pushed the replacement pad on the nailer contact tip.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Non marring pad was lost.

    John - October 24, 2023
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Senco Nailer

    Snapped it right on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad seals

    Michael - May 24, 2021
    Removed, replaced, repaired!
    Easy, thank you.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    safety mechanism removed by previous owner

    Ryan - April 8, 2020
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    its very easy to simply slide the safety assembly into the hole and guide on either side of the feed throat of the nailer. then you just tighten the screw and its all set. I bought my nailer from a pawn shop and the previous owner had for some reason removed the safety on it as well as the tip. easy fix. great website
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Lost tip

    Allen - September 23, 2018
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , None

    Slipped new one right on,
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Air leaking from the top

    Robert - May 19, 2017
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    , Allen wrench

    Removed the top cap and replaced the seal. Cleaned and oiled the inside. Removed the deflector from the cap and replaced the muffler. Then attached the deflector back on the cap. Then attached the cap to the gun. I also replaced the no mar pad on the safety.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Piston would not retract.

    Dennis - June 12, 2016
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Wrench Set

    Open the seal kit and lay the parts out separately on a clean towel. Then dismantle the nail gun, laying the old seal and o-rings next to the new ones on the towel. You may have to tap the top of the main housing with a soft mallet to release the cylinder. While you have it apart, it is a good time to clean it inside and out. Start installing the o-rings and seals, lubing them after they are in their correct place. Install the rest of the new parts where they went. Then simply press the no-mar pad on the safety. Put a few drops of oil in the air inlet, and you should be good to go.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Safety element missing

    Joseph - April 19, 2016
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    Pliers, Socket set, Adjustable Wrench

    Remove magazine, screw the element into the existing threaded nut, slide the other end of the element into the boss. Replace magazine, test.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No mar pad missing and safety element assembly missing parts latch assembly broken

    Darrell - March 8, 2016
    Tool Type

    Nailer

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    , allen wrenches

    Everything went easy except for the latch, the curve on the latch was to much had to straighten a little, also make sure that if not needing to do, not remove screw from magazine recoil spring, it is not difficult to put back , but can snap back and hit your hand
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Lost tip

    mark - December 15, 2015
    Tool Type

    Nailer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , none needed

    Slip on new tip on safety. Go to work.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal