Easy
15-30 minutes
This is an Original Manufacturer Sourced replacement part used on Ridgid Miter Saw Utility Vehicle. This part is made out of Plastic and is Sold Individually. This part is attached to the unit with Screws and it holds the Lock Lever in place.
Lock Lever Housing 000999131035
OEM part for: Ridgid
Part Number: 000999131035
$3.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Ridgid
AC9945 Miter Saw Utility Vehicle View Diagrams & Manuals
This item works with the following types of products:
- ATV Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy replacement.
I would suggest taking the old part off just before installing the new one so there is no question on the way the part is installed. Everything went great. No issues part is exact replacement for the broken one.
Guest -
February 6, 2023
Verified Purchase
Great part
Part fit perfectly. Works great
Guest -
June 3, 2021
Verified Purchase
Just what I needed
It’s what my stand needed
Guest -
September 11, 2020
Verified Purchase
Great parts
Parts fit perfect and shipping was fast
Rodney -
May 21, 2020
Verified Purchase
Easy repair good quality part
Easy fix, when you have quality parts. Thanks
Brian -
November 14, 2019
Verified Purchase
Easy repair, worked as expected!
Purchased part for my Rigid miter saw, did the job perfectly!
Guest -
June 29, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lock Lever Housing
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken Plastic Lock on Ridgid Mobile Saw Stand
Thomas - November 27, 2015
👍 2 of 2 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Snap a picture on digital phone.
Disassemble locking lever components using both Phillips screwdriver and pliers for bolt.
Keep fasteners.
Rotate stand arm to completely remove it from stand. Pull plastic collet off end so that new locking lever housing can slide onto arm. Put plastic collet back on end of arm in same position. Slide stand arm back in, rotating it into position.
Bolt the locking lever in between the two sides of the housing, then insert the remaining screws to tighten both sides together.
Disassemble locking lever components using both Phillips screwdriver and pliers for bolt.
Keep fasteners.
Rotate stand arm to completely remove it from stand. Pull plastic collet off end so that new locking lever housing can slide onto arm. Put plastic collet back on end of arm in same position. Slide stand arm back in, rotating it into position.
Bolt the locking lever in between the two sides of the housing, then insert the remaining screws to tighten both sides together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lever locks for extended platform were broken
Albert - May 3, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
1. Removed broken hardware and replaced with new.
2. Make sure to use the old hardware as a guide when replacing with the new.
2. Make sure to use the old hardware as a guide when replacing with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the extension arm locking mech broke on my Ridged MITRE saw stand-MS-UV MITER SAW UTILITY VEHICLE
MICHAEL - December 22, 2020
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
My miter saw stand has 2 extension arms-I will need the right side locking mechanism
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Extension arm locks worn out.
Rodney - May 22, 2020
Tool Type
Miter Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Remo ed the extension arms on both sides and replaced lock lever housings, end caps, lock levers and camshaft. Replaced the frame lock return spring as the old one was missing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Locking leaver was broken
Daren - January 22, 2019
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Adjustable Wrench, NA
Parts Used
Very straight forward,
1. Remove the four screws on the old locking leaver
2. Slide the stop arm out
3. Remove the locking leaver
4. Install locking leaver onto the slide stop
5. Install the slide stop
6. Move the locking leaver into position then attach with screws
1. Remove the four screws on the old locking leaver
2. Slide the stop arm out
3. Remove the locking leaver
4. Install locking leaver onto the slide stop
5. Install the slide stop
6. Move the locking leaver into position then attach with screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
These parts were for a Ridgid miter saw stand
Richard - December 29, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
These parts were for fixing an extension arm on a Ridgid miter saw stand. They fit fine and the main parts screw together. The issue has been resolved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The miter saw stand had tipped over and broken a plastic locking mechanism.
Mark - March 7, 2018
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the screws holding the locking mechanism.
2. Slid the extension out of the stand.
3. Removed the broken locking mechanism.
4. Installed the new part.
5. Reassembled the extension assembly.
2. Slid the extension out of the stand.
3. Removed the broken locking mechanism.
4. Installed the new part.
5. Reassembled the extension assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Locking Lever broke off. It was plastic, the repair was simple to complete.
Don - September 9, 2017
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
I carefully removed stop bar, removed two screws holding broken part to saw.
Pay careful attention to disassembling lever, 3 screws, a spring and 3 more screws plus old lever. Make sure you understand which parts the spring goes between.
Reassemble lock lever making sure all 4 parts match how the broken parts came apart.
Pay careful attention to disassembling lever, 3 screws, a spring and 3 more screws plus old lever. Make sure you understand which parts the spring goes between.
Reassemble lock lever making sure all 4 parts match how the broken parts came apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The tool stand extension lock had to be replaced because i had overloaded it.
D - April 22, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Pay some close attention to the unbroken one. Note the the replacement part interlocks with the aluminum tubing. The lock location is another critical observation. I easily installed it incorrectly several times. More attention will reduce multiple installations
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
