Liner (a) 323625
Part Number: 323625
Order within the next 8 hours
and your part ships today!
and your part ships today!
Product Information
Description:
This liner is an authentic replacement part supplied the original equipment manager. It is commonly used in Hitachi compound miter saws. This part is placed in between the turn table and the base assembly. It is made of metal, and it should be replaced if it is damaged. It is recommended to apply Hitachi motor grease to the base assembly surface before replacing this liner. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 14 compatible machines
Products Compatibility
This item works with the following types of products:
- • Miter Saw
- • Saw
Questions & Answers for Liner (a)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Allen wrench
The miter saw became very hard to change miter. Found one of the three liners had folded and was sticking out.
Removed miter lock.
Removed miter stop.
Removed material back stops from both sides.
Removed plastic table inserts.
Removed nut from center pivot bolt.
Removed circular portion of table and saw.
Removed old liners.
Buffed edges that contact liners with steel wool.
Installed new liners.
Greased top surface of liners and bottom of circular portion of saw table.
Replaced saw table and reassembled remaining parts in the reverse order removed.
Removed miter stop.
Removed material back stops from both sides.
Removed plastic table inserts.
Removed nut from center pivot bolt.
Removed circular portion of table and saw.
Removed old liners.
Buffed edges that contact liners with steel wool.
Installed new liners.
Greased top surface of liners and bottom of circular portion of saw table.
Replaced saw table and reassembled remaining parts in the reverse order removed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Disappointed
Seems to me a fragile thin metal part that must be flat would be shipped in a box to protect it . Not a 7.00 bubblewrap envelope. The part was correct but damaged . I flattened it out as I need to use my tool couldn't waste more time on shipping back and forth. It's working but not proper going to look for another one somewhere else unless you can ship one properly. Doubtful as I responded to your performance evaluation and said same thing and no response other than this rating email . Not a good way to do bussiness I guess you would mail fragile glass in a brown paper bag.
Guest -
February 28, 2023
Verified Purchase
eReplacementParts Team
Hi Scott,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information