Medium
30-60 minutes
This is an authentic Makita replacement part manufactured for use with miter saws. The flexible work light provides light for the work area and allows the user to adjust the direction of the light. The light assembly includes a fluorescent bulb, the switch, and lamp box. This light assembly is sold individually.
Light Assembly 125337-5
OEM part for: Makita
Part Number: 125337-5
$45.32
In Stock
Order within the next 2 hours and your part ships today! 
Jump To:
Product Description ?
- Includes part numbers 193595-1, 651522-9 and 152923-9
- Classification: Part
- Weight: 0.53 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Makita
LS1013F Miter Saw View Diagrams & Manuals
LS1013FL Compound Miter Saw View Diagrams & Manuals
LS1214FL 12" Dual Slide Compound Miter Saw View Diagrams & Manuals
LS1214F Saw View Diagrams & Manuals
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
This part replaces obsolete part #: 125137-3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Light Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Many parts were damaged or missing due to over 10 years of professional use.
Jason - February 17, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Socket set, Wrench Set
Parts Used
- Compression Spring 28 - 233165-5
- Stopper Pin - 322317-4
- O-ring 5 - 213021-5
- Hex. Lock Nut M6-10 - 252014-7
- Sub Fence - 150710-0
- Flat Washer 6 - 253715-0
- Countersunk Head Screw M6x35 - 912357-6
- Miter Scale Plate - 816326-8
- Socket Wrench 13 - 782232-8
- Fluorescent Light Set - 193595-1
- Strain Reliever - 901266
- Screw - 330019-32
- Light Assembly - 125337-5
- Dust Cap A&m4931 3579 87 - 45-12-0525
- Plastic Shoe Cover - 48-08-0533
- Foot - N074647
Replaced the power cord and the work light. Replaced the pin that holds the saw in the closed position. Also replaced a few other misc parts. The light, power cord and pin were the biggest reasons I needed to repair just due to safety and ease of use. The pin was the hardest part to replace because I had to remove the large pivot pin that the entire saw hinges on by tapping it out with a mallet and a 1/2" socket extension. The spring that holds the saw in the up position comes out when the hinge pin is removed making it extremely difficult to put everything back together. I realized after the fact that there are holes just below the spring that you can insert a screw driver or Allen wrench or similar object which holds the spring in the closed position. I still haven't figured out if there is an easier way to replace the spring itself since you obviously can't hold it in the closed position if you are trying to replace it, but my spring is fine and I don't have to worry about that now. There were no websites or videos that I could find to show how this is done, but I figured it out. Would have been easier if there was something that explained the holes for holding the spring before I took it all apart and the spring ejected the saw arm.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I accidentally knocked the saw over and broke the lamp assembly.
Bradford - August 17, 2017
Tool Type
Miter Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, soldering iron
Parts Used
1. Removed the lamp assembly with two screws (easy).
2. Snipped the two wires connecting the lamp assembly (red and black) to the saw.
3. Soldered the new lamp wires into the saw and heat shrank the connections.
4. Attached the new lamp assembly to the saw with the two original screws.
2. Snipped the two wires connecting the lamp assembly (red and black) to the saw.
3. Soldered the new lamp wires into the saw and heat shrank the connections.
4. Attached the new lamp assembly to the saw with the two original screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
