Latch 44938000000
Part Number: 44938000000
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
Product Information
Description:
This is a genuine Oster Pro part. This Latch is used on many models of Oster Pro hair clippers. The Latch is made of steel. The Latch locks blades into place while cutting hair. The Latch tip commonly breaks causing the blade to vibrate and to pull off when going through thick hair. Other parts that are commonly purchased with the Latch is the Hinge Assembly (part number 044941-000-000) and the Screws (041664-000-000). A Phillips head screw driver is used to replace the Latch. |
Frequently Purchased With
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers for Latch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clipper latch that hold blades in broke
1. Removed (2) screws removed old latch and replaced with new. Clippers work like new.
Clippers cost $159.99 parts to repair $3.03 plus $5.95 shipping. Great buy thanks for carrying replacement parts.
Clippers cost $159.99 parts to repair $3.03 plus $5.95 shipping. Great buy thanks for carrying replacement parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
clippers aren't cutting. blade wasn't staying on very well.
removed blade
removed both screws on blade latch assembly
aligned new latch
align blade latch assembly and replace screws (screws provided aren't the best. be careful not to strip the head).
removed both screws on blade latch assembly
aligned new latch
align blade latch assembly and replace screws (screws provided aren't the best. be careful not to strip the head).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
HINGE ASSEMBLY HAD BECOME WEAKENED AND WOULD FLIP BLADW UP WHEN PUSHED ITINTO MATTED HAIRD
1. REMOVED 2 SCREWS AND REPLACED HINGE WITH NEW ONE
2. TESTED AND RAN TRIMMER.
3.GAVE MY DOG AN OVER DUE TRIM.
2. TESTED AND RAN TRIMMER.
3.GAVE MY DOG AN OVER DUE TRIM.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Clipper guard was oscillating with the blade
Replaced latch and hinge, now guard stays stationary while blades cut back and forth. Not sure if I needed to replace both but might as well if you have to order them and take it apart.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
the wire for the hinge assembly was bent and did not engage with the latch
I replaced the old hinge assembly with the new one and engaged the spring extensions with the new latch, tightened the screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken blade latch
Removed two retention screws from blade latch assembly, reassembled assembly with replacement part in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Loctite for screw sockets
Blade assembly would not latch in. (2 speed Oster A5 Turbo clippers) broken spring and loose screws sockets.
First I found that the Latch Assembly screw sockets that hold the latch in place had pulled loose from the clippers aluminum housing. This issue caused the latch from pulling tight against the clipper housing. I wiped the surface clean and took some acetone or (you can use wife's finger nail polish remover) on Q-Tips and cleaned the hole. I took some Loctite and applied it to the hole and screw sockets and let it hardened well. Okay now, I took less than 10 minutes to install the parts purchased. The Parts worked and Clipper work great.
Note: I would check the screw sockets that hold the Latch Assembly in place (they should be flush with clipper housing). This has happened to me before so it might be happen to you.
Note: I would check the screw sockets that hold the Latch Assembly in place (they should be flush with clipper housing). This has happened to me before so it might be happen to you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Blades would not seat into the clippers and therefore would not work properly.
1. Removed the blade assembly from the clippers
2. Removed the old latch and hinge assembly
3. Installed the new latch and hinge assembly.
4. Installed the blade assembly.
5. Tested and found that they are working properly again.
2. Removed the old latch and hinge assembly
3. Installed the new latch and hinge assembly.
4. Installed the blade assembly.
5. Tested and found that they are working properly again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clip broken
Unscrew old and replace broken clip. Reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Latch broken on Oster Clipper
Removed two screws, replaced latch, screwed back together. Voila!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
excellent and fast delivery
the 2 small parts for my grooming clipper were in good condition and well packaged
Guest -
July 10, 2021
Verified Purchase
excellent internet buy
it's in and working, my dog loves me again...
Guest -
August 22, 2020
Verified Purchase
worked as expected
received on time, was correct part, worked
Guest -
July 23, 2019
Verified Purchase
good selection of parts and helpful staff
I received several parts to repair my Oster Pet trimmer. The availability and the prices were very reasonable. All parts came in one plastic envelope with all parts in separate smaller labeled plastic envelopes. Highly recommend this company!
Guest -
June 18, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information