Repair Parts Home    Power Tool Parts    Delta Parts    1342143 Knife Locking Bar

1342143 Knife Locking Bar

Part Number: 1342143
DeltaPorter Cable
Availability: Discontinued

This part is no longer available from the manufacturer.

*This part replaces obsolete part #: and 1342143R.

Discussion for Knife Locking Bar - ( 1342143 )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  • Comment:
Question: Locking Bar


Knife Locking Bar - ( 1342143) anybody know where I can find one?
Reply: Locking Bar


MIkes tools @ $7.84 ea
Reply: Locking Bar


i need 2 also...any luck on finding them....and where?????
Question: Dust Collection


I need a dust collector shoot for my TP305,will any of the collector shoots from other planers fit my machine?

After planing white pine,20 ,, 1x6x12s ,dust got under one of the blades and bent the locking bar and blade so bad. The boards were coming out with a bow in the center. anyone else have this problem ?
Reply: Dust Collection


The dust hood for the TP305 is part #50-359 and is available from

I have seen the bent blade issues on several different Delta planers. It seems that it is usually caused by dull knifes. The extra resistance of the dull knives seems to push the blade back enough to allow the dust in. Once it starts and the gap is opened up it just continues and gets worse and worse.

I hope this helps!

Reply: Dust Collection


Yes, I attempted to plane end grain cutting board. That went badly... my fault. A piece of wood stuck under the blade and bent the knife locking bar. However, the blade itself seems undamaged. Fortunately this site has replacement locking bars.
Product Information
Manufacturer: Delta, Porter Cable
Category Number: 1342143
Classification: Part
Weight: 0.55 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
Quick Fix: How to Replace the Knives in a Delta TP305 Planer
If your planer knives become dull, you will want to replace them--or flip them over to the second side. This article wil...
May 30, 2012
Quick Fix: How to Replace the Drive Belt in a Delta TP305 Planer
This article outlines the very simple steps needed to replace the belt in a Delta TP305 planer. ...
April 18, 2012